Try setting the bios to "non plug and play OS".
If that doesn't work, come back.
Knoppix version 2003-06-17
P3 866MHZ
128 MB Ram
15GB HD
On board intergrated Video/Sound/NIC
Compaq DeskPro EN
Initially I completed the entire installation and then recieved the KNOPPIX HALTED meesage, remove cd and then power down. Now Im getting errors such as invalid IO or IRQ input, or cannot start KMSERVER etc, I can run this cd or the one burned at slower speeds x4 etc and install fine on other machines, just curious if there is anything I am missing here to run on this box?
Also at Initiating shutdown sequence wav I see:
*Error* Cannot initialize the agpgart module
Cannot allocate memory
INSmod i810 failed etcetc
Grazie~
Warawara
Try setting the bios to "non plug and play OS".
If that doesn't work, come back.
Thanks, I appreciate the response, I'm getting the 3.3 version atm, will attempt install again here shortly.
Gigabyte AMD B550 UD AC Gaming Motherboard - AMD B550 Chipset - AM4 Socket - AMD
$79.99
***NEW*** BCM RX67Q mATX Gaming Motherboard Combo | Intel i5-3470 | 16GB DDR3
$49.77
Gigabyte Z370P D3 ATX Z370 LGA1151 Motherboard (Support Intel 6/7th 8th 9th)
$59.99
ASUS H110M-R Motherboard Intel 6th/7th Gen LGA1151 DDR4 Micro-ATX i/o shield
$42.00
MSI PRO B650-P WiFi AMD AM5 DDR5 WiFi 6E ProSeries Motherboard
$80.71
Asus Prime H310M-A R2.0 Intel LGA1151 DDR4 Desktop Motherboard I/O Shield READ
$52.95
Asrock Z390 Phantom Gaming 4S/AC Wifi 8th/9th Gen Intel 1151 Motherboard Bulk
$47.56
ASUS B85M-G R2.0 HDMI LGA1150 DDR3 mATX Desktop Motherboard USB 3.0 w/ I/O
$40.95
MSI PRO B650-P WiFi AMD AM5 DDR5 WiFi 6E ProSeries Motherboard
$96.01
GIGABYTE MB10-Datto Motherboard Xeon D-1521- SR2DF 2.40 GHz- Open Box
$110.00