i read somewhere that it won't boot if it's on a ntfs partition, so i haven't tried
Would the following work??
1. Use the tohd=/dev/hda1 to get the compressed Knoppix image written to a FAT32 partition.
2. Copy this compressed Knoppix image file to an NTFS partition. Using Bill's Windows
3. Then boot with fromhd=/dev/hda1 using the boot image file previously copied to the NTFS partition in step 2 above.
If the compressed Knoppix image is already on the NTFS partition will the fromhd=/dev/hda1 boot option work?
What will happen if a person used the tohd=/dev/hda1 boot option if /dev/hda1 were a NTFS partition? Will it give you a warning Will Robinson error message? or what?
I would like to get the compressed Knoppix boot image installed onto my NTFS drive at home then boot using the fromhd boot option for faster boots.
Thanks Much In Advance for any help
Ron
i read somewhere that it won't boot if it's on a ntfs partition, so i haven't tried
why steps 1 and 2 ?Originally Posted by rrolsbe
only
Use windows. Copy your knoppix cd folder \KNOPPIX to NTFS partition
3. Then boot with fromhd=/dev/hda1
Unless the new KNOPPIX has been changed, booting from NTFS is impossible with the stock kernel 2.4 NTFS driver.Originally Posted by oscar
GENUINE CISCO 25G Base Active Optical SFP cable 3M SFP-25G-AOC3M NEW SHIPS FREE
$65.99
Cisco Meraki MA-SFP-10GB-LR 10G SFP+ LR 1310nm 10km LC SMF
$39.99
Cisco Meraki MA-SFP-10GB-SR 10G SFP+ SR 850nm 300m LC MMF
$29.99
Cisco w/ Green Hologram SFP-10/25G-LR-S 10/25GBASE-LR SFP28 Transceiver Module
$79.99
NEW FS SFP-10G-T 10GBASE T SFP+ 30M Transceiver Module (Lot of 1)
$39.95
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02
$5.00
New Cisco w/ Green Hologram SFP-25G-SR-S 25G SFP28 SR 850nm 300m LC MMF Module
$69.99
New Cisco w/ Green Hologram SFP-10G-LR-S 10G SFP+ LR 1310nm 10km SMF LC Module
$34.99