Dear Forum member,
How can I install a .iso DVD in an existing Knoppix installation? Booting of the .iso DVD is not possible.
Thank you for your answer.
hansieb
Dear Forum member,
How can I install a .iso DVD in an existing Knoppix installation? Booting of the .iso DVD is not possible.
Thank you for your answer.
hansieb
Hi,
if you only want to read the content of a .iso file you can mount the file as a loop back device. Do not forget to use the filesystem type 'iso9660' and the option 'readonly'.
If you really want to boot an operating system inside a running Knoppix you can use qemu.
Klaus,
qemu : Boot failed: Could not read from CDROM (code 0003)
.iso visible in File Manager PCManFM
First boot device : cd-rom
Dear Member, Run qemu /home/knoppix KNOPPIX_V7.4.0DVD-2014-09-01-EN.iso Doesn't work. Thank you. hansieb
Last edited by Werner P. Schulz; 08-27-2014 at 03:42 PM. Reason: Postings merged
How should I configure qemu?
$ qemu K2.iso /home/knoppix
qemu: drive with bus=0, unit=0 (index=0) exists
Please tell us more!
Have you a "HD install" and do you want an "ISO install to HD" as they are described at this Wiki website?
Which Knoppix version uses your HD install?
What is the size of RAM of your computer? Why doesn't you can use a DVD drive?
Have look at this Wiki website about using of Qemu.
Werner,
Thank you for your response.
I loaded ARIANE Knoppix V 7.2.0 with a Lili USB Creater on the HD. With this intallation I want to install the Knoppix 7.4.0. DVD on the same HD. (Indirect, because a direct installation of the DVD doesn't work.)
The pc doesn't boot from the DVD but the DVD is visible in /media/sr0
AMD, 1.6GHz, 3GB RAM.
I also tried to install the .iso image from "Linux for Dummies". But this also cann't be installed. The same problem.
Please let me know if you have further questions.
hansieb.
If you try to boot wirh Knoppix 7.4.0. DVD did anything happens or get you an error message?
Did you test the integrity of the download by md5sum?
Nos DOS error messages.
RUN qemu
.....
Booting from DVD/CD..
Boot failed: Could not read from CD ROM (code 0003)
Intergrety is oké, because the same happens with both DVDs.
...
Please answer as exactly as possible my last questions.
Can the DVD drive read any other CD/DVD (not Knoppix)?
Werner,
1 The DVD drive can read a DVD because I can "see" the Knoppix DVD in the File Manager "PCManFM". In /media/sr0 I can "see" KNOPPIX_V7.4.0DVD-2014-08-01-EN.iso
2 It can not boot up from the DVD drive. Nor the ISO DVD from Knoppix, nor the ISO from the book "Linux for Dummies". This is the problem. The DVDs are visible in the File Manager, so it can read a CD/DVD. It can not boot from the same DVD.
3 I put a windows DVD in the DVD driver. I can "see" it in the File Manager.
Thank you,
hansieb
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$239.99
Dell EMC 092GD6 Broadcom 9305-16i LSI Quad Port 4 Port SAS RAID Controller
$84.99
OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire
$36.99
36TB SanDisk G-RAID 2 Thunderbolt 3 External Hard Drive - Excellent Condition
$630.00
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 4Y5H1 High Profile
$15.99
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA Controller Low Profile 9300-8i IT
$15.98
9207-8i PCIE3.0 6Gbps HBA LSI FW:P20 IT Mode ZFS FreeNAS unRAID 2* SFF-8087 US
$32.88
Yottamaster 2 Bay RAID Hard Drive Enclosure USB 3.1 For 2.5" SATA HDD SSD UASP
$56.25
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$55.45