Results 1 to 8 of 8

Thread: Setting Up ADSL Router

Hybrid View

  1. #1

    Setting Up ADSL Router

    Hi. Sorry if this in the wrong forum, but I didnt know where to put it.

    I would like to know how to use my adsl router with linux:

    http://www.dse.co.nz/cgi-bin/dse.sto...ct/View/XH1149

    My ISP uses PPPoA only, and the router settings ( for XP ) are :
    Dns Suffix: none
    Router I.P. 192.168.1.3
    Subnet Mask: 255.255.255.0
    Default Gateway: 192.168.1.2
    Dns Server: 202.27.184.3
    Alternate Dns Server: 202.27.184.5

    Using these settings, and the driver from the hardware manufacturer, (using dhcpcd) how can I setup my router?

  2. #2
    Senior Member
    Join Date
    Oct 2003
    Location
    Sydney, Australia
    Posts
    157
    Are you connecting to the router via USB or ethernet?

    Are you running Knoppix off the CD or have you installed to hard disk?

    If you are using ethernet, to be honest, I'd be kind of surprised if it didn't all just start working by itself, thanks mostly to the miracle of DHCP.

    What happened when you tried?

  3. #3
    Senior Member registered user
    Join Date
    Mar 2003
    Posts
    555
    It's probably somewhere in the menus as well, but try "sudo pppoeconf" from a command prompt.

  4. #4

    Re: Setting Up ADSL Router

    I load Knoppix from a boot cd, so I use expert mode to load my routers driver. I believe it is connected by usb, and when I run the driver, I think it detects this....using DHCPCD makes the lights flash, yet when I try to access the internet from Mozilla or the other program ( forgot the name ) it dosen't work. I can't configure it from the PPPOE one, for two reasons, 1 being it dosent find something when I try, and two is that my ISP only supports PPPOA. My router is configured perfectly for windows, but for some reason it dosent work on linux. If somebody could give me a few instructions to set it up, that would be great.

  5. #5
    Senior Member
    Join Date
    Oct 2003
    Location
    Sydney, Australia
    Posts
    157
    What is the output of the following commands?

    ifconfig

    netstat -rn

  6. #6

    Re: Setting up ADSL Router

    Microsoft Windows XP [Version 5.1.2600]
    (C) Copyright 1985-2001 Microsoft Corp.

    C:\Documents and Settings\stevie>netstat -rn

    Route Table
    ================================================== ========================
    Interface List
    0x1 ........................... MS TCP Loopback interface
    0x10003 ...00 d0 41 12 11 29 ...... XH1149 DSE ADSL Router LAN

    Adapter - Packet Scheduler Miniport
    ===============================================

    Active Routes:
    Network Destination Netmask Gateway Interface Metric
    0.0.0.0 0.0.0.0 192.168.1.2 192.168.1.3 30
    127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
    192.168.1.0 255.255.255.0 192.168.1.3 192.168.1.3 30
    192.168.1.3 255.255.255.255 127.0.0.1 127.0.0.1 30
    192.168.1.255 255.255.255.255 192.168.1.3 192.168.1.3 30
    224.0.0.0 240.0.0.0 192.168.1.3 192.168.1.3 30
    255.255.255.255 255.255.255.255 192.168.1.3 192.168.1.3 1
    Default Gateway: 192.168.1.2
    ================================================== =========================
    Persistent Routes:
    None

  7. #7
    Senior Member
    Join Date
    Oct 2003
    Location
    Sydney, Australia
    Posts
    157
    I meant the output when running Knoppix.

  8. #8

    Sorry

    Oh Sorry, I'll do that in an hour. Im doing a download at the moment. But that information should help anyway.

Similar Threads

  1. Speedtoch 510 lan ADSL- Router problems
    By thunderchief in forum Networking
    Replies: 3
    Last Post: 06-05-2005, 07:20 PM
  2. Help Setting Up ADSL/PCI Card
    By psychophil in forum Networking
    Replies: 1
    Last Post: 10-26-2004, 09:07 AM
  3. Replies: 26
    Last Post: 08-25-2004, 09:12 PM
  4. Replies: 3
    Last Post: 05-14-2004, 04:31 AM
  5. Router
    By pnti in forum General Support
    Replies: 4
    Last Post: 07-21-2003, 05:15 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


S-100 Vector Graphic 12K PROM/RAM Board (Altair, IMSAI) picture

S-100 Vector Graphic 12K PROM/RAM Board (Altair, IMSAI)

$99.95



S-100 Vector Graphic 64K Ram Board (Altair, IMSAI) picture

S-100 Vector Graphic 64K Ram Board (Altair, IMSAI)

$99.95



Vintage Digital Research ZSID 1.4 8

Vintage Digital Research ZSID 1.4 8" Floppy Disk CP/M Z80 Software S-100 Altair

$69.99



S-100 Industrial Micro Systems 8K Static Ram (IMS, Altair, IMSAI) picture

S-100 Industrial Micro Systems 8K Static Ram (IMS, Altair, IMSAI)

$69.95



Altair MITS S100 Backplane 8080A S-100 Replica IMSAI CP/M (bare board) picture

Altair MITS S100 Backplane 8080A S-100 Replica IMSAI CP/M (bare board)

$40.00



BYTE Magazine Cover Jan 1977 Canvas Print 8

BYTE Magazine Cover Jan 1977 Canvas Print 8"x10" Retro Computer Altair 880

$7.00



TDL “the ZPU” rev 1 February 1977 s100 cpu board  picture

TDL “the ZPU” rev 1 February 1977 s100 cpu board

$345.00



S-100 backplane motherboard bare PCB 9 slot (for Altair/IMSAI) picture

S-100 backplane motherboard bare PCB 9 slot (for Altair/IMSAI)

$34.99



CP/M 86 1.1R 8086 Highmonitor 8 Inch Floppy Diskette 80s IMSAI Altair picture

CP/M 86 1.1R 8086 Highmonitor 8 Inch Floppy Diskette 80s IMSAI Altair

$29.99



ALTAIR Bitcoin Mining Solutions PDU IEC SERIES 100-250V 30A/24A Power Distribute picture

ALTAIR Bitcoin Mining Solutions PDU IEC SERIES 100-250V 30A/24A Power Distribute

$99.00