-
During boot process .. " init: Switching to runlevel: 0
I did a HDD install from the Knoppix linuxtag 3.4 DVD, removed all knoppix-specifics and replaced them with official debian packages & kernel 2.6
Now the system won't complete the boot process on its own - after mounting the root filesystem and loading the modules, it initiates a shutdown.
I'm not sure if this is being called from a shutdown script, or what's going on.
I have to start in single user mode and issue "init 2" to get it to work.
Has anyone else seen this, and if not , I would still appreciate some insight.
-
Senior Member
registered user
Try edit your /etc/inittab :
On top of the file should have this line:
# The default runlevel.
id:5:initdefault:
Yout id must be 5, if different change it.
Also check your /etc/rc5.d folder for unusual symlink.
-
Thanks I have tried that, but am still at a loss. The system begins to boot, then switches to runlevel 0 on its own, and halts.
I can only get it to boot by entering single-user mode and issuing 'init 2' .
I have since reinstalled knoppix using knoppix-installer, and upgraded with debian-specific debs. Exact same problem..
What could be causing the system to enter runlevel 0 on its own, during boot? My hdd is clean, and it's not being fsck'd , and nothing out of the ordinary appears to be happening except for this.
-
Senior Member
registered user
I believed there is some services that not suppose to run in your init.
Try list your /etc/rc5.d and /etc/rcS.d, and post it here.
Similar Threads
-
By onnrmf in forum General Support
Replies: 4
Last Post: 03-18-2009, 02:38 PM
-
By aldend123 in forum General Support
Replies: 3
Last Post: 12-29-2004, 10:19 PM
-
By metzelplik in forum Customising & Remastering
Replies: 5
Last Post: 08-23-2004, 08:11 PM
-
By Samer Eberlin in forum Ideas
Replies: 4
Last Post: 08-17-2004, 05:06 PM
-
By bilzer in forum General Support
Replies: 0
Last Post: 04-20-2004, 06:53 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Genuine Cisco SFP-10G-SR 0-2415-03 10 Gigabit Transceiver
$5.40

NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*
$24.00

HPE P10109-B21 MCX512F-ACAT 10/25GbE Dual-Port SFP28 NIC P10107-001 P12608-001
$100.00

Cisco Acacia DP04QSDD-E25-840 400G QSFP-DD Coherent DCO Transceiver Module
$699.99

CISCO SFP-GE-Z , 1000BASE-ZX SFP 1550nm 70km DOM
$69.00

SFP TO RJ45 TRANSCEIVER SFP MODULE COPPER SFP OPTICAL PORT TO RJ45 ETHERNET PORT
$7.99

Intel X520-DA2 10Gb 10Gbe 10 Gigabit Network Adapter NIC Dual Port E10G42BTDA
$28.94

HP 560SFP+ 10GB 2-port PCIe NIC Ethernet ADAPTER 669279-001 w/ (2) 10GB SFP+
$16.99

CISCO 10GBASE-SR SFP "Lot of 4” SFP-10G-SR
$47.99

Cisco WS-C3650-12X48UR-L 48-Port Stackable Layer 3 8x10G SFP+ Port Switch
$129.99