-
Internet sharing?
I've read the sticky theard about Internet Sharing but I don't understand.
I'm using Knoppix3.6, witch have Internet access, through my 1st network card.
Then I have a WinXP machine connected to my 2nd network card.
How do I make it so the XP machine can surf through Knoppix3.6??
I am new to Linux so explain in extreme detail plz 
btw I cant even ping the XP machine (with all firewalls disabled)
-
Senior Member
registered user
The easiest way... okay? You not using router, right?
If running knoppix from cd:
1) Run network card configuration, don't choose dhcp. Set your ip ..etc.
2) Set your internet connection and connect.
3) Run knoppix terminal server...just hit <enter> on every question asked.
If running knoppix from HDD:
1) You can use above procedure.
2) You can apt-get (install) guidedog or firestarter.
a) Guidedog:
i) Tick on enable routing, enable IP masquerade,FTP,IRC.
ii) If your other pc has an IP, set an IP range in No-masquerade Addresses section. Ex: 192.168.0.0/24 if the pc ip is 192.168.0.x
iii) Hit apply, and your done.
b) Firestarter ***choose this if you want to share connection with firewall in one package.
i) You the wizard to set your connection sharing and firewall.
-
Senior Member
registered user
If you talk german, this brief introduction might help:
http://www.linuxeinsteiger.info/anle...etz/netz11.php
It tells you how to setup linux as router.
(Perhaps guidedog and/ or firestarter do nearly the same thing behind the scene.)
I guess you need at least
Code:
route add default gw LINUX_IP
, translated to Win-syntax, called from the win-machine.
I used the tutorial in a slightly different way - two linux-machines, one network-card each, a switch, and the dsl-stuff, and it works perfectly.
Similar Threads
-
By Jwizzman in forum Networking
Replies: 8
Last Post: 09-12-2004, 09:52 PM
-
By tomtool in forum MS Windows & New to Linux
Replies: 1
Last Post: 08-03-2004, 09:45 AM
-
By iisatrini in forum Networking
Replies: 2
Last Post: 03-09-2004, 09:07 PM
-
By Yeti in forum Networking
Replies: 1
Last Post: 12-09-2003, 06:56 AM
-
By captaincourage in forum Networking
Replies: 1
Last Post: 11-29-2003, 06:01 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

S-100 Vector Graphic 12K PROM/RAM Board (Altair, IMSAI)
$99.95

S-100 Vector Graphic 64K Ram Board (Altair, IMSAI)
$99.95

Vintage Digital Research ZSID 1.4 8" Floppy Disk CP/M Z80 Software S-100 Altair
$69.99

S-100 Industrial Micro Systems 8K Static Ram (IMS, Altair, IMSAI)
$69.95

Altair MITS S100 Backplane 8080A S-100 Replica IMSAI CP/M (bare board)
$40.00

BYTE Magazine Cover Jan 1977 Canvas Print 8"x10" Retro Computer Altair 880
$7.00

TDL “the ZPU” rev 1 February 1977 s100 cpu board
$345.00

S-100 backplane motherboard bare PCB 9 slot (for Altair/IMSAI)
$34.99

CP/M 86 1.1R 8086 Highmonitor 8 Inch Floppy Diskette 80s IMSAI Altair
$40.00

ALTAIR Bitcoin Mining Solutions PDU IEC SERIES 100-250V 30A/24A Power Distribute
$99.00