-
Cant use my hda
ive got two hd one is hda which is a fat32 partition and the second is hdc which is an ntfs partition that has my Windows, when i boot it detects both hd. now the problem is my hda which is my fat32 partition becomes a swap partition and is not mounted. im using this partition as a data partition in windows and im planning of using it also in knoppix. help
-
Junior Member
registered user
You need a boot manager. If you have two hds, then running a dual boot system is easy with GAG... See:
http://gag.sourceforge.net/
Install GAG and keep all windows stuff one one drive and all linux syuff on another. If this means transfering your data from your FAT32 system to your other drive, do it. What GAG does is mount on the first section of eitehr drive. Then it gives you the option as to what system to boot.
What I did is first install Windows fresh on hda, then I installed linux (knoppix) fresh on hdb. After that, I installed GAG on hda... Voila!
Hope this helps
-
-
Junior Member
registered user
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

New Barebones Supermicro 5019D Server, 4C/8T Xeon D-2123T, 1U Rackmountable, 10G
$449.99

HP ProLiant MicroServer Gen8 G1610T @2.3 GHz, 16GB, 712317-001 NO HDD/OS
$199.00

Supermicro CSE-937 3U Storage Chassis No CPU No HDD No Ram Tested & Reset
$129.99

Nasuni NF-50 Supermicro Server, Atom CPU C2558, @ 2.40GHz, 8GB RAM-No HDD/OS/AC
$250.00

Supermicro 2U X10DRU-i 2x E5-2680 v3 2.5ghz 32gb Ram 240gb SSD 2x GPU *READ*
$369.99

SuperMicro 4U CSE 847 36 Bay LFF Barebone 2x 1280W w/ 2x Bays 2.5 Rear w/Trays
$499.99

1U Edge Firewall Server X11SCW-F Xeon E-2174G 0 RAM M.2 NVME 3x PCI-e 2x PSU X
$175.00

HPE ProLiant MicroServer Gen10 Opteron X3421 32GB DDR4 Intel X550 10GbE No HDD
$599.00

Supermicro 505-2 Server
$280.00

Supermicro 1U Network Server Appliance 16GB RAM 800GB SSD 6 LAN Ports Powers On
$450.00