Is this a winmodem? If so see this:
http://www.knoppix.net/forum/viewtopic.php?t=15619
Addition to the info in the link: Kanotix has winmodem support built it, you may find it easier to switch to Kanotix.
knoppix knows what kind of modem im using when i tell it to scan for it (connexant 56k data/fax modem). Which is right, but when ever i try to dial in it says the modem won't work. How can i install the modem for it to detect and work?
Tyler
Is this a winmodem? If so see this:
http://www.knoppix.net/forum/viewtopic.php?t=15619
Addition to the info in the link: Kanotix has winmodem support built it, you may find it easier to switch to Kanotix.
i searched for unsupported winmodems and it told me "connexant 56k data/fax modem"... so how can i make knoppix support it?
thanks
tyler
Go here: http://www.linmodems.org/
Download and run the scanmodem tool
Find and install a driver if it's available.
The driver can be located from the linmodem site.
Some software modems are better than others.
Good luck
If Kanotix has Winmodem support...I have Kanotix Bug Hunter X Fix 2 installed....How do I go about making it work?
Winmodem is a term that refers to modems that let the operation system do some of the work for them. They are better called software modems, but because they are supported under windows and rarely and grudgingly under linux they are called winmodems. There are drivers for some of the software modems for linux and some are packaged live cd distros such as knoppix, kanotix, mepis etc.
The best place to see if a linux driver for your modem exists is : http://www.linmodems.org/
If possible, download and run the scanmodem tool found there, however if you can't open a root shell and typeand look for information about your modem in the output. You basically want to identify the chipset that powers the modem, and you can also open you pc case and eyeball the modem (if your eyes are better than mine) get some manufacturer names and numbers then consult the database at the linmidems site.Code:lspci
Another to id the modem is to K->sysem->info center and click on pci.
A couple of links for drivers for common chipsets:
Rockwell /Conexant
http://www.linuxant.com/drivers/modemident.php
Licent /Agere
http://www.heby.de/ltmodem
Good luck.

S-100 Vector Graphic 12K PROM/RAM Board (Altair, IMSAI)
$99.95
S-100 Vector Graphic 64K Ram Board (Altair, IMSAI)
$99.95
Vintage Digital Research ZSID 1.4 8" Floppy Disk CP/M Z80 Software S-100 Altair
$69.99
S-100 Industrial Micro Systems 8K Static Ram (IMS, Altair, IMSAI)
$69.95
Altair MITS S100 Backplane 8080A S-100 Replica IMSAI CP/M (bare board)
$40.00
BYTE Magazine Cover Jan 1977 Canvas Print 8"x10" Retro Computer Altair 880
$7.00
TDL “the ZPU” rev 1 February 1977 s100 cpu board
$345.00
S-100 backplane motherboard bare PCB 9 slot (for Altair/IMSAI)
$34.99
CP/M 86 1.1R 8086 Highmonitor 8 Inch Floppy Diskette 80s IMSAI Altair
$40.00
ALTAIR Bitcoin Mining Solutions PDU IEC SERIES 100-250V 30A/24A Power Distribute
$99.00