-
Newbie needs help: Errors when running knoppix-installer
I wanted to try knoppix on my hard drive, but for some reason the knoppix-installer is giving me some problems.
First, right now I have the following partitions on my hard drive: 26GB NTFS for windows, and 4GB of unpartitioned space which I wanted to use to try out knoppix from the hard drive.
I tried the following both by using the standard kernel and the newer one by typing knoppix26:
1) from the terminal window, i typed "sudo knoppix-installer". A dialog comes up saying that I don't meet the requirements (but isn't 4GB enough for a standard installation?)
2) I typed "IGNORE_CHECK=1 sudo knoppix-installer". I start by selecting a "beginner" installation. But when I click Next, I get some error from Xdialog (I think) and the terminal window displays the help for the xdialog command?? The the installation quits.
After, I tried to reboot with the "knoppix 2" (text mode) option, and run "IGNORE_CHECK=1 sudo knoppix-installer" again. Still, after choosing the "beginner" installation, I would immediately get this:
Fatal dialog error:
Error: Expected at least 7 tokens for --radiolist, have 4.
Use --help to list options.
And the installation would abort.
Am I doing something wrong? Can anyone help? Thanks
-
Senior Member
registered user
I'm no expert on this, but you may want to try partition before you try the installer. In the K menu in KDE, go to System=>Qtparted or type sudo qtparted in the shell. You'll want about 500MB as a linux swap partition, and 3GB for ext2 or ext3. Like I said, I'm probably talking out of my rectum.
-
I have exactly the same problem... I always get the "don't meet requirement" dialog while I actually have an empty 6 GB space... If I continue to try to make partition, in the end I'll get error message "OPEN DISK READ-ONLY - YOU HAVE NO PERMITION TO WRITE"... and then... "FATAL ERROR CANNOT GET DISK SIZE".....
can someone help with this problem, cause I'm new to Linux and seems that I won't be able to solve this although I've spent like the whole day... =(
Similar Threads
-
By pvsurfer in forum Hardware & Booting
Replies: 6
Last Post: 04-07-2005, 12:06 AM
-
By muzicman82 in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 09-05-2004, 04:57 AM
-
By apoth in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 06-18-2004, 01:06 AM
-
By snake001 in forum General Support
Replies: 2
Last Post: 11-01-2003, 11:29 AM
-
By Drago in forum General Support
Replies: 5
Last Post: 10-18-2003, 06:44 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

HP ProLiant MicroServer Gen8 G1610T @2.3 GHz, 16GB, 712317-001 NO HDD/OS
$199.00

Supermicro 1U Network Server Appliance 16GB RAM 800GB SSD 6 LAN Ports Powers On
$450.00

Supermicro CSE-937 3U Storage Chassis No CPU No HDD No Ram Tested & Reset
$129.99

Supermicro 505-2 Server
$280.00

Supermicro 2U X10DRU-i 2x E5-2680 v3 2.5ghz 32gb Ram 240gb SSD 2x GPU *READ*
$369.99

New Barebones Supermicro 5019D Server, 4C/8T Xeon D-2123T, 1U Rackmountable, 10G
$449.99

Supermicro 5019D-4C-FN8TP Xeon D-2123IT (4C/8T) 64GB DDR4 10GbE 480GB 1U Server
$689.00

1U Edge Firewall Server X11SCW-F Xeon E-2174G 0 RAM M.2 NVME 3x PCI-e 2x PSU X
$175.00

Nasuni NF-50 Supermicro Server, Atom CPU C2558, @ 2.40GHz, 8GB RAM-No HDD/OS/AC
$250.00

Supermicro CSE-937 3U Storage Chassis No CPU No HDD No Ram Tested & Reset
$129.99