-
ACPI problems ...
Hello,
i have a sony vaio laptop and need to install ACPI to get the IRQ of my modem.
but i have some problems during the install procedure:
i have the knoppix version 2.4.19-xfs.
at first i downloaded the file
acpi-20020918-2.4.19.diff.gz
from the ACPI homepage.
then i copied the file into /usr/src
then i run:
gunzip acpi-20020726-2.4.18.diff.gz
cd linux
patch -p1 <../acpi-20020726-2.4.18.diff
After that i got the follwing message:
can't find file to patch at input line 206
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|diff -Nura linux-2.4.19orig/MAINTAINERS linux-2.4.19acpi/MAINTAINERS
|--- linux-2.4.19orig/MAINTAINERS Sat Sep 21 20:10:11 2002
|+++ linux-2.4.19acpi/MAINTAINERS Sat Sep 21 01:00:37 2002
--------------------------
File to patch:
What can i do to solv this problem. how can i install ACPI? withut ACPI the IRQ of my modem is umknown.
Any other suggestion to get the IRQ?
(I am a linux newbie, so please dont write a too short answer)
Thanks!
-
ACPI patches
To install ACPI, you need to patch and compile your own kernel. To make matters a bit worse, the ACPI patch doesn't apply cleanly to a debian kernel. What I did is download the 2.4.20 kernel from www.kernel.org, apply the patch, and follow the instructions in the README file to make a new kernel
make xconfig
make dep; make clean; make bzImage; make modules
you then need to make install and make modules_install as root
then edit /etc/lilo.conf to add a new kernel.
-
Instead of patching and all that stuff, get the 2.4.22 kernel which has acpi included, and spare yourself the trouble of all those commands and do it the Debian way. Much cleaner and easier.
As su
cd /usr/src
tar -xpvjf linux-2.4.22.tar.bz2
mv linux linux-2.4.22
ln -s linux-2.4.22 linux
cd /usr/src/linux
make menuconfig
make-kpkg clean
make-kpkg -revision=custom1.0 kernel_image
dpkg -i ../kernel-image-2.4.22_custom.1.0_i386.deb
Put the proper entry into lilo.conf and you're done. Reboot.
-
Senior Member
registered user
Or better yet- (if you like things simple and easy) go to this how-to.
Similar Threads
-
By OP4Latino in forum Hardware & Booting
Replies: 0
Last Post: 05-27-2005, 06:27 AM
-
By Longfield in forum Laptops
Replies: 0
Last Post: 05-12-2005, 11:54 AM
-
By glimpse in forum Laptops
Replies: 0
Last Post: 03-28-2005, 11:30 AM
-
By dracula in forum Laptops
Replies: 6
Last Post: 04-16-2004, 11:06 PM
-
By hal2000 in forum General Support
Replies: 1
Last Post: 01-05-2003, 01:23 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

S-100 Vector Graphic 12K PROM/RAM Board (Altair, IMSAI)
$99.95

S-100 Vector Graphic 64K Ram Board (Altair, IMSAI)
$99.95

Vintage Digital Research ZSID 1.4 8" Floppy Disk CP/M Z80 Software S-100 Altair
$69.99

S-100 Industrial Micro Systems 8K Static Ram (IMS, Altair, IMSAI)
$69.95

Altair MITS S100 Backplane 8080A S-100 Replica IMSAI CP/M (bare board)
$40.00

BYTE Magazine Cover Jan 1977 Canvas Print 8"x10" Retro Computer Altair 880
$7.00

TDL “the ZPU” rev 1 February 1977 s100 cpu board
$345.00

S-100 backplane motherboard bare PCB 9 slot (for Altair/IMSAI)
$34.99

CP/M 86 1.1R 8086 Highmonitor 8 Inch Floppy Diskette 80s IMSAI Altair
$40.00

ALTAIR Bitcoin Mining Solutions PDU IEC SERIES 100-250V 30A/24A Power Distribute
$99.00