Try manually getting one via dhcp
ifconfig ath0 up
pump -i ath0
I have a dell laptop with Knoppix 3.9 installed. I bought a new Proxim gold card that uses Atheros (madwifi) drivers. It works ok on my network with my windows setup but I am having an issue with Knoppix 3.9. Knoppix ses the card and with IWCONFIG and KWIFIMANAGER I can see my network and even other networks in my area but I am not getting an IP address. I made sure that Encription and Mac address filtering were turned off and I still can not get IP. Again it works ok with my windows setup but not knoppix.
My Knoppix setup does work with my linksys card but I really wanted to use the proxim because of the external antenna.
Any ideas of what I am doing wrong?
Try manually getting one via dhcp
ifconfig ath0 up
pump -i ath0
I did not know that pump command but it worked!!!Originally Posted by foamrotreturns
Thanks big time!!
There are too many dhcp commands to remember these days and it seems every distro uses a different one.
for future reference, and if that one doesn't work for you (you being any person reading this thread) you might try these as well:
dhclient
dhcpcd

OPNsense pfSense 8-Core Atom C3758 2.2GHz 8GB DDR4 64GB SSD 8x NIC QAT AES VPN
$145.00
pfSense Firewall 16-Core Atom C3958 8GB DDR4 RAM 64GB SSD 8x 1Gbe QAT AES-NI VPN
$184.99
OPNsense pfSense 16-Core Atom C3958 16GB ECC RAM 512GB SSD 8-Port QAT AES-NI VPN
$258.00
Cisco Meraki MX67-HW Security Appliance Firewall NEW Unused Unclaimed
$202.50
Fortinet FortiGate 60F FG-60F Firewall Tested Reset Deregistered OEM PSU
$99.99
Fortinet FortiGate 60F FG-60F P24286-03-13 Network Firewall Security Appliance
$155.75
Firewalla Gold Pro 10GbE Firewall Router with Rack Mount Ears and USB Key
$829.99
Firewalla Gold Pro - 10 Gbps Cyber Security Firewall
$693.00
NETGEAR ProSafe 8-Port Gigabit VPN Firewall FVS318G NEW IN BOX
$69.99
$140.00