-
Senior Member
registered user
bootloading an iso file from ext2 filesystem (not using cd)
Hello
I'm having the same problem, but for me the system "can't mount cd-rom filesystem" and got into mini-linux (only support for mount, cat, no ls, no /bin...).
Can be possible that my problem is related to be an SCSI disk? (the machine is a cluster server... can't be possible to use other disk :cry: )
my /boot/grub/grub.conf:
title Knoppix ISO from HD
kernel /cluster-images/linux init=/etc/init ro ramdisk_size=100000 initrd=/cluster-images/minirt.gz console=tty0 console=ttyS0,115200n8 bootfrom=/dev/sda2 2 lang=en apm=power-off nofirewire nousb nomce noeject home=/dev/sda2 myconf=/dev/sda2 vga=normal BOOT_IMAGE=knoppix
initrd /cluster-images/minirt.gz
Wich is the idea
To run image downloaded from net and update our system only reinstalling the iso :)
In my configuration, minirt (now in /boot/cluster-images/minirt.gz) is taken from knoppix CD - subdirectory ISOLINUX and bootfrom tried specifying full path or just using /KNOPPIX/KNOPPIX names for automatically selection, none of this possibilities worked.
Any Idea?
Thanks a lot.
-
Senior Member
registered user
Re: bootloading an iso file from ext2 filesystem (not using

Originally Posted by
jacksonon
Any Idea?
The boot command may be longer that what linux can handle, which is 255 characters. To confirm this try booting again and at that minimal shell type "cat /proc/cmdline" Do you see the same line that you see in your grub.conf line?
Regards,
- Robert
http://www.cwelug.org
-
Senior Member
registered user
Re: bootloading an iso file from ext2 filesystem (not using

Originally Posted by
rwcitek

Originally Posted by
jacksonon
Any Idea?
The boot command may be longer that what linux can handle, which is 255 characters. To confirm this try booting again and at that minimal shell type "cat /proc/cmdline" Do you see the same line that you see in your grub.conf line?
Regards,
- Robert
http://www.cwelug.org
Thanks, I'll try to do this possibility.
meanwhile I tested saving configuration script (saveconfig) booting in CD mode, but was impossible even when the partititon ext2 (/dev/sda2) was mounted, the system replyes that there is no partition suitable, may be I'm having problems because of using SCSI disk as primary?
Regards,
George.
Similar Threads
-
By sakiZ in forum Tips and Tricks
Replies: 0
Last Post: 03-29-2007, 02:13 AM
-
By Forcemaster in forum Hdd Install / Debian / Apt
Replies: 0
Last Post: 09-06-2004, 01:27 PM
-
By dan_the_v8man in forum Hdd Install / Debian / Apt
Replies: 4
Last Post: 06-21-2003, 02:13 PM
-
By gwylion in forum Hdd Install / Debian / Apt
Replies: 3
Last Post: 05-12-2003, 03:31 AM
-
By sweetzip in forum Ideas
Replies: 2
Last Post: 03-28-2003, 07:47 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Vintage DEC E2052-AA AlphaServer I/O Board 9 Gold Ceramic ICs 4.3 LB Gold Scrap
$729.99

Vintage DEC Digital T1043 DWMBB/B VAXBI XMI Adapter 5018232-01 C1 VAX Board
$109.99

Vintage DEC Digital XMI-A1 5017293-01A1 LWPR BE3-0 VAX Circuit Board T2012
$74.99

Vintage DEC/Mostek memory systems MK 8015 AA-00 6805-08015 1100 REV C(B7)
$279.99

Vintage DEC Digital Equipment DELNI 8-Port Ethernet Local Network Hub VAXstation
$79.95

Vintage DEC VT100 Series Terminal (Powers On)
$499.99

Vintage Digital VR241-A color CRT monitor, powers on, DEC Rainbow or terminal
$150.00

Vintage DEC Digital Equipment Flip-Chip Module Lot Parts
$59.99

Vintage DEC Digital Starion 200 Desktop PC Powers On Boots To BIOS NO HDD - DW
$269.99

Vintage DEC Digital VSXXX-AA.B03 Hawley 3-Button Mouse 1986 Tested Working
$111.00