-
Memory problem on reboot
I have a Dell 4550 and normally run Win XP. When I boot to the Knoppix CD I have no problems. However, after shuting down and removing the CD, my computer won't boot. The problem is that during the reboot/self-diagnostic phase, the computer hangs when checking the memory (a single 512 Mb DIMM). To fix the problem I remove and reinsert. Voila. This has happened both times I booted to the Knoppix CD.
Am I doing something wrong? How can I keep this from happening?
Thanks.
-
Senior Member
registered user
I have a similar problem. After doing knx-hdinstall to an old Gateway PII266 with only 32MB RAM (I added a 256MB linux swap partition), the machine won't cold boot. Either I have to hit the power button again or the screen comes up with "no operating system found." If I then do a warm boot (CTRL/ALT/DEL) it will boot properly to the dual boot screen. What can I do about this?
BTW, on the dual boot screen, is there a way to increase the delay time before it boots itself? I have a BIOS password set so my son can't get on any of my PCs when I'm not looking. He'd live on the net if I let him. Anyway, by the time I enter the BIOS password, the dual boot count-down is down to 1 or 2 seconds at most. I can deal with it, but the other inhabitants of this house hold cannot....
-
Re: Memory problem on reboot
EXACT same problem here: also a Dell 4550 and Win XP; screen boots to black (no BIOS) after I use Knoppix. Diagnostic lights in back are indicating a memory problem ... I think. (Hard to read those things.)
Am able to solve the problem by opening the PC case and then closing it up again. Maybe that causes the BIOS to re-examine the system fresh again, and kicks it out of whatever "bad memory" state it's in. Your guess is as good as mine.
Would love to know a fix for this.
DR
-
Senior Member
registered user
Re: Memory problem on reboot
--Check for a BIOS upgrade for your motherboard. Just an idea...

Originally Posted by
darose
EXACT same problem here: also a Dell 4550 and Win XP; screen boots to black (no BIOS) after I use Knoppix. Diagnostic lights in back are indicating a memory problem ... I think. (Hard to read those things.)
Am able to solve the problem by opening the PC case and then closing it up again. Maybe that causes the BIOS to re-examine the system fresh again, and kicks it out of whatever "bad memory" state it's in. Your guess is as good as mine.
Would love to know a fix for this.
DR
Similar Threads
-
By benedict1000 in forum General Support
Replies: 2
Last Post: 07-30-2004, 11:47 AM
-
By pmaccabe in forum Hardware & Booting
Replies: 0
Last Post: 03-01-2004, 12:42 AM
-
By hgpuke in forum General Support
Replies: 2
Last Post: 01-07-2004, 10:42 PM
-
By bartavelle in forum Customising & Remastering
Replies: 0
Last Post: 11-27-2003, 05:10 PM
-
By rrolsbe in forum General Support
Replies: 1
Last Post: 09-12-2003, 09:42 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

HP PROLIANT MICROSERVER GEN8 E3-1220LV2 @ 2.30GHz, 8GB RAM, NO HDD/OS
$164.97

Dual Xeon E5-2698 Server-Supermicro X10DRL-i - Noctua SilverStone RM41-506
$449.99

HP ProLiant MicroServer Gen8 Xeon E3-1265L v2 16GB ECC RAM 4-Bay NAS, NO Drives
$300.00

Super Micro 113M-3 Server Intel Xeon 5Tb HDD used great condition
$70.00

HPE ProLiant MicroServer Gen 10 - Opteron x3421 - 16GB DDR4 - 120GB SATA SSD
$350.00

HPE ProLiant MicroServer Gen10 Plus Xeon E-2224 3.4GHz 16GB RAM 2TB HDD NO OS
$949.99

Supermicro 1027GR-TSF 1U Rackmount Server 2x Xeon 2.3GHz 128GB DDR3
$219.99

New Barebones Supermicro 5019D Server, 4C/8T Xeon D-2123T, 1U Rackmountable, 10G
$449.99

Supermicro 505-2 Server
$280.00

Supermicro 721-2 Mini Tower Black Computer Server NO Hdd
$375.00