With Knoppix my laptop is running over 60 degrees Celsius. With some other distros I've used (Ubuntu, Kanotix), powernowd is enabled by default. It lowers the CPU temperature by about 15 degrees.
I can install powernowd to Knoppix (apt-get install powernowd), but it won't run. As root, I execute the following command and get these errors:
root@x31:~# /usr/sbin/powernowd
powernowd: PowerNow Daemon v0.97, (c) 2003-2006 John Clemens
powernowd: Found 1 scalable unit: -- 1 'CPU' per scalable unit
/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq: No such file or directory
PowerNowd encountered and error and could not start.
Please make sure that:
- You are running a v2.6.7 kernel or later
- That you have sysfs mounted /sys
- That you have the core cpufreq and cpufreq-userspace
modules loaded into your kernel
- That you have the cpufreq driver for your cpu loaded,
(for example: powernow-k7), and that it works. Check
'dmesg' for errors.
Apparently the problem is that Knoppix has no file
/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq
Has anybody found a fix for this?

SFP TO RJ45 TRANSCEIVER SFP MODULE COPPER SFP OPTICAL PORT TO RJ45 ETHERNET PORT
$7.99
Dell Intel X710-DA2 5N7Y5 Dual-Port 10GbE SFP+ PCIe 3.0 x8 Network Adapter
$27.50
NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*
$24.00
Intel SPTSLP2SLCDE 100G-DR1 QSFP28 500m 1311nm Transceivers - Lot of 10 - New
$200.00
Genuine Cisco SFP-10G-SR 0-2415-03 10 Gigabit Transceiver
$5.40
HP 560SFP+ 10GB 2-port PCIe NIC Ethernet ADAPTER 669279-001 w/ (2) 10GB SFP+
$16.99
Intel X520-DA2 10Gb 10Gbe 10 Gigabit Network Adapter NIC Dual Port E10G42BTDA
$28.94
New Sealed Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Transceiver Module *US
$17.00
Cisco Acacia DP04QSDD-E25-840 400G QSFP-DD Coherent DCO Transceiver Module
$699.99
Cisco WS-C3650-12X48UR-L 48-Port Stackable Layer 3 8x10G SFP+ Port Switch
$129.99