Results 1 to 3 of 3

Thread: "Windows did not shut down properly" - can't mount

  1. #1
    Junior Member
    Join Date
    Aug 2006
    Posts
    4

    "Windows did not shut down properly" - can't mount

    My friends' laptop stopped working so I'm using knoppix to try to recover some of the files. When I try to mount the drive I get this error:

    Code:
    root@1[mnt]# mount /dev/hda1 /mnt/hda1
    Couldn't mount device '/dev/hda1' : Operation not supported
    Windows did not shut down properly.  Try to mount volume in windows, shut down and try again.
    Mount failed.
    Problem is, she wasn't paying attention when installing what she thought was an update for office, when it was actually a new version of windows. So i'm not sure if the drive had been formatted or what, but if i could just mount it and copy a coupl eof .docs over to a jump drive that'd be perfect, then i can format her drive and install dual boot linux/windiows or somethin.

    So how can I get around this error? We can't boot her windows (let alone shut it down), blue screens of death like crazy.

  2. #2
    Senior Member registered user
    Join Date
    Jul 2006
    Posts
    117
    When you use the mount command without any options, you are asking to mount in read-write mode. For safety reasons, Knoppix does not mount NTFS partitions in read-write mode when there are problems on them (like when they did not shut down properly).

    Knoppix will mount a problem NTFS partition in read-only mode. Since you only want to mount in read-only mode to copy a few files, do this:

    mount /dev/hda1 /media/hda1 -o ro

    You can then copy the files off and do your reinstall of Windows.

    Note that it should be /media/hda1 not /mnt/hda1.

    Alternatively, you could use your Windows recovery CD to boot and do a chkdsk to fix the problems. After that Knoppix should mount.

    Regards.

  3. #3
    Junior Member
    Join Date
    Aug 2006
    Posts
    4
    Unfortunately I just got to work and can't try that. Will have to try it when I get home. I don't remember if i tried ro or not. sounds good though, as long as I can get these files off we're fine.

    Would have tried the recovery disk, but she doesn't have one. bought this crappy laptop off some other college kid (who probably stole it himself) so came with nothing but windows on it.

    why mount to media and not mnt? My nokia 770 uses media and not mnt as well... I've only been using linux for 6 months so I don't understand much of it and the stuff behind things. (i do love the power though!)

    Anyway, off topic, since i downloaded the knoppix image (took me forever!) I made a couple copies and am showing it buddies and giving them copies so they can play with linux. I get so many people bitching a bout windows when all they want to do is type in office and surf in firefox and IM in gaim. :-/ here's linux folks its easy and powerfull and doesnt screw you like windows.

    well i hope it works!

Similar Threads

  1. "only root can mount noauto,users,exec"
    By dbls in forum Hardware & Booting
    Replies: 7
    Last Post: 12-01-2009, 08:23 PM
  2. "Could Not Mount Device" - Question About Hard Dri
    By Mr K in forum Hdd Install / Debian / Apt
    Replies: 3
    Last Post: 10-05-2008, 06:37 PM
  3. Fix for WINE "Warning:...L"c:\\windows" is no
    By rharazin in forum General Support
    Replies: 2
    Last Post: 12-11-2006, 04:31 PM
  4. KNOPPIX 3.8.1 "could not mount device"
    By rioachim in forum Hardware & Booting
    Replies: 0
    Last Post: 04-17-2005, 01:47 AM
  5. Boot Problem: "mount: No such file or directory"
    By LinuxGeek in forum Hdd Install / Debian / Apt
    Replies: 0
    Last Post: 12-20-2003, 07:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


SFP TO RJ45 TRANSCEIVER SFP MODULE COPPER SFP OPTICAL PORT TO RJ45 ETHERNET PORT picture

SFP TO RJ45 TRANSCEIVER SFP MODULE COPPER SFP OPTICAL PORT TO RJ45 ETHERNET PORT

$7.99



NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping* picture

NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*

$24.00



Intel SPTSLP2SLCDE 100G-DR1 QSFP28 500m 1311nm Transceivers - Lot of 10 - New picture

Intel SPTSLP2SLCDE 100G-DR1 QSFP28 500m 1311nm Transceivers - Lot of 10 - New

$200.00



Dell Intel X710-DA2 5N7Y5 Dual-Port 10GbE SFP+ PCIe 3.0 x8 Network Adapter picture

Dell Intel X710-DA2 5N7Y5 Dual-Port 10GbE SFP+ PCIe 3.0 x8 Network Adapter

$27.50



Genuine Cisco SFP-10G-SR 0-2415-03 10 Gigabit Transceiver picture

Genuine Cisco SFP-10G-SR 0-2415-03 10 Gigabit Transceiver

$5.40



HP 560SFP+ 10GB 2-port  PCIe NIC Ethernet ADAPTER 669279-001 w/ (2) 10GB SFP+ picture

HP 560SFP+ 10GB 2-port PCIe NIC Ethernet ADAPTER 669279-001 w/ (2) 10GB SFP+

$16.99



Intel X520-DA2 10Gb 10Gbe 10 Gigabit Network Adapter NIC Dual Port E10G42BTDA picture

Intel X520-DA2 10Gb 10Gbe 10 Gigabit Network Adapter NIC Dual Port E10G42BTDA

$28.94



New Sealed Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Transceiver Module *US picture

New Sealed Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Transceiver Module *US

$17.00



Cisco Acacia DP04QSDD-E25-840 400G QSFP-DD Coherent DCO Transceiver Module picture

Cisco Acacia DP04QSDD-E25-840 400G QSFP-DD Coherent DCO Transceiver Module

$699.99



Cisco WS-C3650-12X48UR-L 48-Port Stackable Layer 3 8x10G SFP+ Port Switch picture

Cisco WS-C3650-12X48UR-L 48-Port Stackable Layer 3 8x10G SFP+ Port Switch

$129.99