Results 1 to 7 of 7

Thread: cloop problem with knoppix 5.1

  1. #1
    Member registered user
    Join Date
    Jul 2006
    Location
    toronto, canada
    Posts
    87

    cloop problem with knoppix 5.1

    I have downloaded knoppix 5.1 cd, did the md5 checksum, but when I booted it from cd, it couldn't find
    /cdrom/KNOPPIX/modules/cloop.ko. I tried the testcd cheat, but it doesn't give any message. I wound up in a very limited command-line shell. I looked up the file through Windows 2000 and found it. I was using 5.0 with no problem.

    My machine is a no-name P4 with 256M ram, 1.6GHz, 40G hard-drive. I've tried it on both CD drives, a Sony CRX230E, and LG CRD-8521B.

    Has anyone else had a problem with the cloop file under 5.1 ?

  2. #2
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    It has worked fine for me. Your problem sounds like it may have been caused by a high speed burn, or a marginal reader or marginal media.
    ---
    Verifying of md5 checksum and burning a CD at slow speed are important.

  3. #3
    Member registered user
    Join Date
    Jul 2006
    Location
    toronto, canada
    Posts
    87
    I tried a slowest burn on a CD-RW. Perhaps I should try a CD-R (which I have been using in the past). I'll try this after my daughter's optometrist appointment. (I have a few things to take care of before she returns to university)

  4. #4
    Member registered user
    Join Date
    Jul 2006
    Location
    toronto, canada
    Posts
    87
    I tried another burn on a CD-R. I have knoppix 5.1 now! It must have been a bad burn, although testcd didn't reveal anything wrong.

  5. #5
    Junior Member
    Join Date
    Jan 2007
    Posts
    5
    Quote Originally Posted by ndb
    I tried another burn on a CD-R. I have knoppix 5.1 now! It must have been a bad burn, although testcd didn't reveal anything wrong.
    I confirm this bug...for me the CD gives me this error in 50% of case...

  6. #6
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    Quote Originally Posted by willemijns
    Quote Originally Posted by ndb
    I tried another burn on a CD-R. I have knoppix 5.1 now! It must have been a bad burn, although testcd didn't reveal anything wrong.
    I confirm this bug...for me the CD gives me this error in 50% of case...
    What are you confirming, that 1/2 of your burns are bad? That would seem to be a confirmation that you have marginal media, a flakey drive, or that you burn too fast, not a "bug" in Knoppix. If you are confirming that half of your downloads are bad then you are using the mirrors and are seeing what I saw for years before BitTorrent feeds were available, I would suggest that you learn to use BitTorrent.
    ---
    Verifying of md5 checksum and burning a CD at slow speed are important.

  7. #7
    Junior Member
    Join Date
    Jan 2007
    Posts
    5
    Quote Originally Posted by Harry Kuhman
    I confirm this bug...for me the CD gives me this error in 50% of case...
    What are you confirming, that 1/2 of your burns are bad?.[/quote]

    sorry, my sentence could be mispellled i actually have this probleme of "cloop.ko"
    in 5.1.0 in 50% of case... my CD is good with "knoppix testcd" and i have no problem with 5.0.1

Similar Threads

  1. Problem with cloop.o & minirt.gz / Knoppix 3.8.1
    By sand in forum Customising & Remastering
    Replies: 1
    Last Post: 05-13-2005, 09:51 PM
  2. Problem with cloop
    By lrathle in forum Customising & Remastering
    Replies: 2
    Last Post: 09-05-2004, 05:47 PM
  3. problem with cloop
    By sabel in forum Customising & Remastering
    Replies: 2
    Last Post: 12-01-2003, 09:15 PM
  4. problem with cloop module...
    By Myrdhin in forum Customising & Remastering
    Replies: 2
    Last Post: 08-01-2003, 02:54 PM
  5. Problem with cloop
    By arkaine23 in forum Customising & Remastering
    Replies: 2
    Last Post: 07-08-2003, 05:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


SFP TO RJ45 TRANSCEIVER SFP MODULE COPPER SFP OPTICAL PORT TO RJ45 ETHERNET PORT picture

SFP TO RJ45 TRANSCEIVER SFP MODULE COPPER SFP OPTICAL PORT TO RJ45 ETHERNET PORT

$7.99



Dell Intel X710-DA2 5N7Y5 Dual-Port 10GbE SFP+ PCIe 3.0 x8 Network Adapter picture

Dell Intel X710-DA2 5N7Y5 Dual-Port 10GbE SFP+ PCIe 3.0 x8 Network Adapter

$27.50



Cisco Acacia DP04QSDD-E25-840 400G QSFP-DD Coherent DCO Transceiver Module picture

Cisco Acacia DP04QSDD-E25-840 400G QSFP-DD Coherent DCO Transceiver Module

$699.99



Cisco QSFP-40G-SR-BD  Module  10-2945-02  NEW CLAMSHELL picture

Cisco QSFP-40G-SR-BD Module 10-2945-02 NEW CLAMSHELL

$45.50



Genuine Cisco SFP-10G-SR 0-2415-03 10 Gigabit Transceiver picture

Genuine Cisco SFP-10G-SR 0-2415-03 10 Gigabit Transceiver

$5.40



Lot of 5 Cisco 10G SFP+ 850nm 300m Transceiver Module P/N: SFP-10G-SR-10-2415-03 picture

Lot of 5 Cisco 10G SFP+ 850nm 300m Transceiver Module P/N: SFP-10G-SR-10-2415-03

$15.00



Intel X520-DA2 10Gb 10Gbe 10 Gigabit Network Adapter NIC Dual Port E10G42BTDA picture

Intel X520-DA2 10Gb 10Gbe 10 Gigabit Network Adapter NIC Dual Port E10G42BTDA

$28.94



HP 560SFP+ 10GB 2-port  PCIe NIC Ethernet ADAPTER 669279-001 w/ (2) 10GB SFP+ picture

HP 560SFP+ 10GB 2-port PCIe NIC Ethernet ADAPTER 669279-001 w/ (2) 10GB SFP+

$16.99



NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping* picture

NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*

$24.00



Dell 10 Gigabit SFP+ SR Transceiver 0XYD50 NEW SEALED picture

Dell 10 Gigabit SFP+ SR Transceiver 0XYD50 NEW SEALED

$24.99