I don't think there's any code for that. Given that you know it doesn't work, why not disconnect the drive?
Hi there, Im trying to revive an old computer that doesn't have a working hard drive.. Since Knoppix is the best liveCD out there, i thought i'd use it.. Its booting up fine and working well. But because my hard drive is not working, it keeps making a weird noise inside the box, and freezes the liveCD session.
Is there any cheat so that KNOPPIX ignores the fact that i have a hard drive on my system?
Thanks in advance!
I don't think there's any code for that. Given that you know it doesn't work, why not disconnect the drive?
---
Verifying of md5 checksum and burning a CD at slow speed are important.
I could do.. But would the LiveCD still boot up?
for example, UBUNTU didnt like it when i didn't have the hard drive....
Many people use Knoppix with no drive at all. It does not need one. Assuming that you don't have a BIOS problem that needs the hard drive (unlikely, but I would take the hard drive out of the boot order just to be sure) then you should have no problem. Less power, less noise, less things to go up in smoke, and if it's a laptop longer battery life too.Originally Posted by Scorpio123
---
Verifying of md5 checksum and burning a CD at slow speed are important.
Awesome, i'll give that a try!! With its saving config capabilities its the best alternative to spending money on a new hard drive for such an old piece of junk!
Thanks for the reply!!
I don't know how old your old piece of junk is, it might be a lot newer than some of the systems that I still run. In fact, that it can run Knoppix without a hard drive swap file confirms that it is. But yea, it's generally a bad idea to upgrade old hardware. And depending on the age you might even find new hard drives will not work with it (many older systems had serious limitations on the size of hard drive they will support). But, if you don't have a spare you may be able to scrounge on old hard drive for it at some point. Until then Knoppix should be fine without a hard drive.
---
Verifying of md5 checksum and burning a CD at slow speed are important.
well to be honest it isn't that old... Got it about 7-8 years ago.. Its a Pentium 4 1.7Ghz, 256MB RAM.. But it hasn't been used for a LONG time, so its working even worse than it should hehehe.
But im only using it as a temporary PC until i can find an AC adaptor for my HP dv1000..
Thanks again for the help dude!

Supermicro 2U X10DRU-i 2x E5-2680 v3 2.5ghz 32gb Ram 240gb SSD 2x GPU *READ*
$369.99
HP Proliant MicroServer Gen 8 2.23GHz Xeon 16GB RAM NO SSD
$249.99
Supermicro CSE-937 3U Storage Chassis No CPU No HDD No Ram Tested & Reset
$129.99
$280.00
New Barebones Supermicro 5019D Server, 4C/8T Xeon D-2123T, 1U Rackmountable, 10G
$449.99
HPe Proliant Microserver Gen10 AMD Opteron 16GB RAM, 3x Intel SSD, Working
$600.00
SuperMicro 4U CSE 847 36 Bay LFF Barebone 2x 1280W w/ 2x Bays 2.5 Rear w/Trays
$499.99
Supermicro SuperServer E300-15 - SYS-e300-9C - 16GB RAM 240GB Samsung SSD
$239.00
Nasuni NF-50 Supermicro Server, Atom CPU C2558, @ 2.40GHz, 8GB RAM-No HDD/OS/AC
$250.00
Supermicro E300-12C Mini 1U Barebone X12SCV-LVDS LGA1200 SNK-P0073A4 w/ Adapter
$225.00