-
Junior Member
registered user
My internet issues are back...
I am once again having internet connectivity issues. If I open Konqueror and try to go to the Knoppix website I get this message:
An error occurred while loading http://www.knopper.net/knoppix/:
Unknown host www.knopper.net
Net card config brings up these results:
eth1 Link encap:Ethernet HWaddr 00:16
3:A8:91
F
inet addr:128.119.27.174 Bcast:128.119.27.255 Mask:255.255.254.0
inet6 addr: fe80::216:d3ff:fea8:91df/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1746 errors:0 dropped:0 overruns:0 frame:0
TX packets:43 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:155538 (151.8 KiB) TX bytes:3632 (3.5 KiB)
Interrupt:16
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:16 errors:0 dropped:0 overruns:0 frame:0
TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:800 (800.0 b) TX bytes:800 (800.0 b)
Does this provide any insight? What should I be looking for when I run netcardconfig?
-
Administrator
Site Admin-
I don't see anything awful about your netcardconfig info. As before you are sending and receiving packets. And as before, the next step is to try
then
If the first works and the second fails then there is a problem that is keeping you from doing a DNS lookup on knoppix.net. And I take it we should assume that you can't get to any URL on the Internet, not just Knoppix.net, correct?
-
Junior Member
registered user
Thats correct, I can't access anything. I'll try those pings and report back.
-
Administrator
Site Admin-
Re: My internet issues are back...

Originally Posted by
Cambo105
I'm not sure why that final colon is in the top url, it shouldn't be and I get an error with it there also (but a different error than yours). I can get to http://www.knopper.net/knoppix/ or just www.knopper.net though.
-
Junior Member
registered user
Here is what I came up with:
PING 72.232.180.133 (72.232.180.133) 56(84) bytes of data.
64 bytes from 72.232.180.133: icmp_seq=1 ttl=48 time=51.4 ms
knoppix@Knoppix:~$ ping knoppix.net
ping: unknown host knoppix.net
Also I tried typing http://www.knopper.net/knoppix/ directly into the browser and I got the same error message. So I guess its a DNS problem? Excuse my ignorance, but what exactly is that and what are the remedies?
-
Administrator
Site Admin-

Originally Posted by
Cambo105
.....So I guess its a DNS problem? Excuse my ignorance, but what exactly is that and what are the remedies?
As mentioned in your previous thread, DNS is the system that looks up URL and translates them into IP addresses. You could have answered this yourself with a simple search. Google is your friend. (AKA: STFW).
In a previous thread here a similar problem was reported and speculated that it was related to how the DNS servers in question were dealing with IPv6 (most users still use only IPv4 and so don't see IPv6 problems, but some of the software on the Knoppix disc apparently supports IPv6). I know they say that they don't support Linux, but this might be a good thing to discuss with the system admin people. Failing that, I would read through the thread that I referenced you to and see if it doesn't give you some things to try. I can't test any of these myself, since my Internet Service Provider limits me to IPv4 (as does my router). There are many different DNS servers that you have access to, changing the DNS server used may help (this is set by DHCP originally but this setting can be changed, see the thread for details). Also, just using a different browser may resolve the issue.
It may be worth it to you to take notes on what DNS server your system is using when it fails, and check it again later if you find it working again. Your DHCP server may be selecting from several DNS servers, and one might be configured in a way that causes this problem, while others are configured in ways that do not. If you were to report this issue with the IP address of the problem DNS server and the IP address of a DNS server that does not cause the problem to the network admin, and explain the problem, then it is likely that they would correct the configuration of the problem DNS server and you would have to deal with it manually in the future.
-
Administrator
Site Admin-
Here's a thread that talks about how to disable IPv6 in firefox (AKA IceWeazel).
And, of course, I'm assuming that other people running Windows on the same network and using the same DNS server are not seeing the same problem. A bad DNS server could cause this problem without being an IPv6 issue, but in that case you likely wouldn't be able to post here, and I would expect you to know that the problem wasn't limited to Knoppix users. So unless I hear otherwise I'll stick with my IPv6 theory.
-
Junior Member
registered user
Ok, so here is what unfolded this afternoon, following a tiresome electrical and computer engineering exam nonetheless.
I booted knoppix, and launched firefox. I got the message Checking Compatibility of Add Ons, which lasted for several minutes, then the window just disappeared. At this point, fed up, I just left it and did some calc homework. A few minutes later, the FF browser popped. So I typed about:config and disabled IPv6 DNS, closed FF and reopened. I tried to get to google.com, nothing. So i tried knoppix.net, still nothing. At this point I typed 72.232.180.133 in, and like magic I'm at Knoppix.net. Then i tried knoppix.net, that worked as well. So i tried google.com and that worked too. I searched for "knoppix forum", and thats where I am right now, posting this reply. Is this a predicted course of events?[/list]
-
Administrator
Site Admin-

Originally Posted by
Cambo105
Is this a predicted course of events?...
No, not really. Even if plugging in the IP address somehow allowed your system to later link the URL to the IP (it wouldn't), there are other IPs on the Knoppix.net page (such as the google ads) that need their own DNS lookup. I'm not clear on why DNS lookup started working. It may be some delayed action from turning off IPv6 (as I said, I have no hands on experience with IPv6), or it might be something else. Since this problems seems to come and go for you, I suspect it's "something else".
---
Verifying of md5 checksum and burning a CD at slow speed are important.
-
Junior Member
registered user
I'm posting this via windows (I had to run a windows program, Quartus II), so I'll try booting up Knoppix later and see if the same procedure yields the same results. Its kinda of confusing and I wish I had more time to really research this and play around with Knoppix.
Similar Threads
-
By chris-harry in forum The Lounge
Replies: 5
Last Post: 11-30-2004, 05:35 AM
-
By Craig2 in forum General Support
Replies: 0
Last Post: 04-12-2004, 02:22 PM
-
By dtk in forum General Support
Replies: 3
Last Post: 04-11-2004, 02:58 PM
-
By kashif in forum Networking
Replies: 7
Last Post: 06-25-2003, 01:24 AM
-
By spreadthecream in forum Customising & Remastering
Replies: 2
Last Post: 01-03-2003, 02:04 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

HP ProLiant MicroServer Gen8 G1610T @2.3 GHz, 16GB, 712317-001 NO HDD/OS
$199.00

Nasuni NF-50 Supermicro Server, Atom CPU C2558, @ 2.40GHz, 8GB RAM-No HDD/OS/AC
$250.00

Supermicro 505-2 Server
$280.00

Supermicro E200-8D Barebones Server Chassis Xeon D-1528 X10SDV-6C-TLN4F 2x10GbE
$445.00

Supermicro 2U X10DRU-i 2x E5-2680 v3 2.5ghz 32gb Ram 240gb SSD 2x GPU *READ*
$369.99

New Barebones Supermicro 5019D Server, 4C/8T Xeon D-2123T, 1U Rackmountable, 10G
$449.99

SuperMicro 4U CSE 847 36 Bay LFF Barebone 2x 1280W w/ 2x Bays 2.5 Rear w/Trays
$499.99

1U Edge Firewall Server X11SCW-F Xeon E-2174G 0 RAM M.2 NVME 3x PCI-e 2x PSU X
$175.00

Supermicro 1U Network Server Appliance 16GB RAM 800GB SSD 6 LAN Ports Powers On
$450.00

Supermicro CSE-937 3U Storage Chassis No CPU No HDD No Ram Tested & Reset
$129.99