-
Bootfrom not recognized
When I try to use the "bootfrom" cheat code listed in "knoppix-cheatcodes.txt in the CD or DVD to boot from an iso image on my hard drive I get a message "could not find kernel image on ..."
This happens with Vers4.0.2 on a Win98SE machine and Vers5.1 on a WinXPhome machine.
In the Win98SE machine, the iso file is on a second HD in folder "My Documents/Knoppix/" and is that used to produce the CD.
At F3 boot: I enter bootfrom=/dev/sdb1/My Documents/Knoppix/K*.iso
In the WinXPhome machine, the iso file is on a third partition of the HD in folder "Knoppix/" and is that used to produce the DVD.
At F3 boot: I enter bootfrom=/dev/sda3/Knoppix/K*.iso
Both versions boot up & work correctly without pressing F3.
Any advice?
-
Administrator
Site Admin-
Re: Bootfrom not recognized

Originally Posted by
OldCanoeist
...Any advice?
I haven't used this option in ages, so something might have changed, but I think your problem is related to the confusing way that Windows hides the my documents directories, or else to the problems windows has with spaces in names. Try putting the iso file in the root directory (C:\) and I expect that it will boot fine from there.
---
Verifying of md5 checksum and burning a CD at slow speed are important.
-
Harvey;
From C:\ it is OK and also from C:\Temp\ and from D:\.
Out of curiousity I will try various changes to the "My Documents" folder name.
Thanks for your response.
-
Administrator
Site Admin-

Originally Posted by
OldCanoeist
Harvey;
From C:\ it is OK and also from C:\Temp\ and from D:\.
Out of curiousity I will try various changes to the "My Documents" folder name.
Thanks for your response.
I think you have 2 different problems:
- 1. In Win98, look at the 8.3 style name in Win98, or boot the CD and browse the file system to find the acceptable name.
2. XP hides my documents in strange places, not directly under C. Again browse the disk after booting from the disc to find the corrct name.
And don't forget that in Linux case is important, be sure to match the file name exactly as you see it from the CD.
-
Harry;
WinXPhome cheat code - knoppix bootfrom=/dev/sda3/KNOPPIX/K*.iso
where iso file is in D:/KNOPPIX/ and D:/ is the third partition works OK.
Win98SE cheat code - knoppix bootfrom=/dev/hdb1/MYDOCU~1/KNOPPIX/K*.iso
where iso file is in D:/My Documents/KNOPPIX/ and D:/ is a FAT32 second hard drive
works OK however the second hard drive can't be made writeable since it is in use
by Knoppix.
Thanks again.
Similar Threads
-
By Albretch in forum Hardware & Booting
Replies: 1
Last Post: 06-27-2006, 06:20 AM
-
By hellfred in forum Hardware & Booting
Replies: 2
Last Post: 11-02-2005, 09:44 AM
-
By jwally in forum Customising & Remastering
Replies: 4
Last Post: 10-13-2005, 10:36 AM
-
By darkstarr in forum General Support
Replies: 0
Last Post: 06-29-2005, 08:29 PM
-
By A. Jorge Garcia in forum General Support
Replies: 6
Last Post: 08-26-2004, 07:36 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

New Barebones Supermicro 5019D Server, 4C/8T Xeon D-2123T, 1U Rackmountable, 10G
$449.99

HP ProLiant MicroServer Gen8 G1610T @2.3 GHz, 16GB, 712317-001 NO HDD/OS
$199.00

Nasuni NF-50 Supermicro Server, Atom CPU C2558, @ 2.40GHz, 8GB RAM-No HDD/OS/AC
$250.00

Supermicro CSE-937 3U Storage Chassis No CPU No HDD No Ram Tested & Reset
$129.99

Supermicro 2U X10DRU-i 2x E5-2680 v3 2.5ghz 32gb Ram 240gb SSD 2x GPU *READ*
$369.99

1U Edge Firewall Server X11SCW-F Xeon E-2174G 0 RAM M.2 NVME 3x PCI-e 2x PSU X
$175.00

SuperMicro 4U CSE 847 36 Bay LFF Barebone 2x 1280W w/ 2x Bays 2.5 Rear w/Trays
$499.99

Supermicro X10DRU-i 2U 12LFF 2x E5-2680 v4 128gb Ram 480gb SSD 2x Nvidia K80
$749.99

Supermicro 505-2 Server
$280.00

Supermicro 1U Network Server Appliance 16GB RAM 800GB SSD 6 LAN Ports Powers On
$450.00