I remastered my KNOPPIX 6.2.1 CD When I boot with the new CD it says "The graphical Subsystem could not be stated or terminated unexpectedly. was there something I need to do before I created the ISO image??
I am using the documentation at http://knoppix.net/wiki/Knoppix_Reamstering_Howto In this documentation it says that for >= Knoppix 6.0 I should use SHA1 instead of MD5 I also tried lowering my burn spped to 8x and am still getting the same result.
Was there ever an answer posrted for this???? I have the same exact issue.
Same problem here. Did anybody find a solution to this??
Details:
my remastered cd boots to the prompt and then displays the following message:
The graphical subsystem could not be started
or terminated unexpectedly.
Maybe your graphics adapter or monitor are not auto-configurable.
Please try to reboot and give some of the Knoppix-Cheatcodes
at the initial boot:-prompt, which match your graphics adapter.
Examples:
knoppix xmodule=radeon (or ati, nv, cirrus, ...)
knoppix xmodule=fbdev
knoppix xmodule=vesa
knoppix hsync=90 vsync=75
I can execute commands, navigate the filesystem, and ping URL's but the gui won't load and the above message keeps appearing about every minute or so.
the only changes I made in my remaster were to uninstall openoffice and change the background.jpg image.
Take a look at this thread (also in the remastering forum) and see if that information points you in a good direction. Looks like the same type of problem, possibly. The manner in which the new master image is created is a bit tricky.
Cheers!
Krishna![]()
The exact sme thing is happening to me. I have meticulously followed the directions. I get:
Details:
my remastered cd boots to the prompt and then displays the following message:
The graphical subsystem could not be started
or terminated unexpectedly.
Maybe your graphics adapter or monitor are not auto-configurable.
Please try to reboot and give some of the Knoppix-Cheatcodes
at the initial boot:-prompt, which match your graphics adapter.
Examples:
knoppix xmodule=radeon (or ati, nv, cirrus, ...)
knoppix xmodule=fbdev
knoppix xmodule=vesa
knoppix hsync=90 vsync=75
and if i startx manually it tells me something about "suspicious ownership root:root"
Any help..please?
this happened when I followed "re-master your flash installation" because I used a ntfs partition to copy my files to.
when I used another ext2 partition to copy the files to everything worked.
oh and do ctrl+alt+f6/f5 and you should be able to see more info?

Genuine Cisco SFP-10G-SR 0-2415-03 10 Gigabit Transceiver
$5.40
NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*
$24.00
Cisco Acacia DP04QSDD-E25-840 400G QSFP-DD Coherent DCO Transceiver Module
$699.99
Cisco WS-C3650-12X48UR-L 48-Port Stackable Layer 3 8x10G SFP+ Port Switch
$129.99
SFP TO RJ45 TRANSCEIVER SFP MODULE COPPER SFP OPTICAL PORT TO RJ45 ETHERNET PORT
$7.99
Intel X520-DA2 10Gb 10Gbe 10 Gigabit Network Adapter NIC Dual Port E10G42BTDA
$28.94
HP 560SFP+ 10GB 2-port PCIe NIC Ethernet ADAPTER 669279-001 w/ (2) 10GB SFP+
$16.99
Cisco SFP-10G-SR V03 850nm 10GBASE-SR SFP+ MMF 10-2415-03 Transceiver
$4.99
Dell 10 Gigabit SFP+ SR Transceiver 0XYD50 NEW SEALED
$24.99
Arista SFP-10G-SR 10GBASE-SR XVR-10001-20 850nm SFP+ Optical Transceiver
$20.70