Results 1 to 5 of 5

Thread: Media used for Knoppix-benchmarks and which is best

  1. #1
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    198

    Media used for Knoppix-benchmarks and which is best

    I am using Super Tallent Pico C series 4 GB USB stick for Knoppix. It is very small in size and has very good reed speed. Here is the output of sudo hdparm -Tt /dev/sdb on my system:

    /dev/sdb:
    Timing cached reads: 1360 MB in 2.00 seconds = 680.29 MB/sec
    Timing buffered disk reads: 70 MB in 3.05 seconds = 22.94 MB/sec

    Here is some info regarding cached reads and buffered disk reads:

    Cached reads:
    "Perform timings of cache reads for benchmark and comparison pur‐
    poses. For meaningful results, this operation should be
    repeated 2-3 times on an otherwise inactive system (no other
    active processes) with at least a couple of megabytes of free
    memory. ###This displays the speed of reading directly from the
    Linux buffer cache without disk access. This measurement is
    essentially an indication of the throughput of the processor,
    cache, and memory of the system under test.###"

    Buffered disk reads:
    "Perform timings of device reads for benchmark and comparison
    purposes. For meaningful results, this operation should be
    repeated 2-3 times on an otherwise inactive system (no other
    active processes) with at least a couple of megabytes of free
    memory. This displays the speed of reading through the buffer
    cache to the disk without any prior caching of data. ###This mea‐
    surement is an indication of how fast the drive can sustain
    sequential data reads under Linux, without any filesystem over‐
    head.### To ensure accurate measurements, the buffer cache is
    flushed during the processing of -t using the BLKFLSBUF ioctl."

  2. #2
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    512
    I am using a poor man's install of Knoppix 6.2.1 on my hard disk. It is a WD1200BEVE built into my notebokk (hp omnibook xt1000).
    Here is the output of sudo hdparm -Tt /dev/sda on my system:
    /dev/sda:
    Timing cached reads: 118 MB in 2.03 seconds = 58.13 MB/sec
    Timing buffered disk reads: 88 MB in 3.01 seconds = 29.27 MB/sec
    I am delivering these timings for comparative purposes. I do not use a USB stick for Knoppix on that system because it supports USB 1.1 only.

  3. #3
    Senior Member registered user
    Join Date
    Dec 2009
    Posts
    423


    I am also using poor man's install on HD, here is mine :-

    /dev/sda:
    Timing cached reads: 2258 MB in 2.00 seconds = 1129.61 MB/sec
    Timing buffered disk reads: 194 MB in 3.01 seconds = 64.37 MB/sec

    I prefer not to suffer the agony of the slower devices.

  4. #4
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    For my SanDisk 2Gb SD Card,

    The output of sudo hdparm -Tt /dev/sdb is as follows:
    /dev/sdb:
    Timing cached reads: 2146 MB in 2.00 seconds = 1073.60 MB/sec
    Timing buffered disk reads: 30 MB in 3.20 seconds = 9.37 MB/sec

  5. #5
    Senior Member registered user
    Join Date
    Dec 2009
    Posts
    423
    Meaning you have a very fast computer, but your flash is very slow. Consider moving the entire '/mnt-system' to your harddisk.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


New Barebones Supermicro 5019D Server, 4C/8T Xeon D-2123T, 1U Rackmountable, 10G picture

New Barebones Supermicro 5019D Server, 4C/8T Xeon D-2123T, 1U Rackmountable, 10G

$449.99



HP ProLiant MicroServer Gen8 G1610T @2.3 GHz, 16GB, 712317-001 NO HDD/OS picture

HP ProLiant MicroServer Gen8 G1610T @2.3 GHz, 16GB, 712317-001 NO HDD/OS

$199.00



Supermicro 505-2   Server picture

Supermicro 505-2 Server

$280.00



Supermicro CSE-937 3U Storage Chassis No CPU No HDD No Ram Tested & Reset picture

Supermicro CSE-937 3U Storage Chassis No CPU No HDD No Ram Tested & Reset

$129.99



Supermicro 2U X10DRU-i 2x E5-2680 v3 2.5ghz 32gb Ram  240gb SSD 2x GPU *READ* picture

Supermicro 2U X10DRU-i 2x E5-2680 v3 2.5ghz 32gb Ram 240gb SSD 2x GPU *READ*

$369.99



HPE ProLiant MicroServer Gen10 Opteron X3421 32GB DDR4 Intel X550 10GbE No HDD picture

HPE ProLiant MicroServer Gen10 Opteron X3421 32GB DDR4 Intel X550 10GbE No HDD

$599.00



1U Edge Firewall Server X11SCW-F Xeon E-2174G 0 RAM M.2 NVME 3x PCI-e 2x PSU   X picture

1U Edge Firewall Server X11SCW-F Xeon E-2174G 0 RAM M.2 NVME 3x PCI-e 2x PSU X

$175.00



SuperMicro 4U CSE 847 36 Bay LFF Barebone 2x 1280W w/ 2x Bays 2.5 Rear w/Trays picture

SuperMicro 4U CSE 847 36 Bay LFF Barebone 2x 1280W w/ 2x Bays 2.5 Rear w/Trays

$499.99



Nasuni NF-50 Supermicro Server, Atom CPU C2558, @ 2.40GHz, 8GB RAM-No HDD/OS/AC picture

Nasuni NF-50 Supermicro Server, Atom CPU C2558, @ 2.40GHz, 8GB RAM-No HDD/OS/AC

$250.00



Supermicro 1U Network Server Appliance 16GB RAM 800GB SSD 6 LAN Ports Powers On picture

Supermicro 1U Network Server Appliance 16GB RAM 800GB SSD 6 LAN Ports Powers On

$450.00