Quote Originally Posted by Blacksimon View Post
1) Launch knoppix installer (experimental version)
2) Select desired target device (I try to use a 16GB Sony Usb not empty)
3) Select installation method:
case "i" Standard installation on FAT32 with knoppix-data < 4GB (I think is the same of old flash-knoppix)
case "p" New type of installation: first parition FAT32 and second partition dedicated to overlay
4) i choose "p" because i want overlay >4GB (if possible...)
5) ok at warning message all data will erase on usb. I want.
6) ok at second warning message before proceed. Do it.
7) select the size of overlay partition. min: 400MB - max: the available free space left on usb
8 ) I select the max (in my case 8728MB)
9) ok to proceed
10) wait the end of the process (formatting, install boot loader, copy data file)
11) now, if you want, you can encrypt with aes the overlay.
12) Enter a password 8-14 chars lenght and then again to confirm
13) Wait the creation of the encrypted overlay
14) End
Hi,

I spent the weekend to no avail but now have an 8GB and 16GB Sandisk and today a 64GB Lexar USB drives with Knoppix 7.05 DVD - None of 3 will boot! Am I missing a step(s), somewhere?

10) wait the end of the process (formatting, install boot loader, copy data file)

I started with the 7.05 DVD .... when I had the Graphical Interface; I selected from (lower left) menu, Knowppix, Install to USB -Experimental. I let the Install Program do everything - Very smooth. When Finished, I reboot and receive the No DEFAULT or UI configuration directive found!

10) wait the end of the process (formatting, install boot loader, copy data file)

So, is your Step number 10... consisting of multiple steps; like installing lilo - Please, it's been some time. I'm back because of the possibility to carry mutiple boots and DVD of data on a USB. Thanks.