-
where did my 4gig dl go?
knoppix 742 where did my 4gig dl go?
i noticed on distrowatch that there was an updated version of knoppix which included a fix for shellshock.
yippee!
however, they only showed a link for a 4g file.
knowing that the documentation mentions somewhere that a knoppix cd can include 2gig of software due to some fancy "when used" compression, i wondered what the 4g dl, i.e. 12 gig of actual software, could possibly include.
i decided that whatever it was - i didn't need it, probably, as i more than happy with the standard release.
so i went to the knoppix site to find a cd dl.
when i couldn't find one (i looked on a number of mirror sites too),
i bit the bullet and dl'd the 4 gig ... which, thanks to sky broadband, would take some time.
when the dl had finished, i verified it with both the md5 & sha1 checksums.
all was well ...
using the flash-knoppix instructions here:
http://knopper.net/knoppix/knoppix742-en.html
i created a bootable flash drive using a 16g kingston.
problem, the bootable partition had only used 743meg
i.e. far less than the 4g i had dl'd.
clearly, it hadn't worked.
so i wiped the pendrive (gparted) ... and started again.
but it was the same ...
question:
what happened to the 4gig file i dl'd?
p.s.
is there any chance of "expanding" on the flash-knoppix instructions plz?
e.g.
1) maybe explain just what an "overlay" file is.
2) certainly detail what minimum size (and type!) partitions are needed.
the reason i make these suggestions:
1)
i initially partitioned my pendrive, before using flash-knoppix, making a 4gig (the size of the file i had dl'd) and the rest of it (12g) ext4.
flash-knoppix didn't like the ext4 so i ended up zapping the entire drive.
2)
if the util is only going to put 743meg on the boot partition then i am wasting over 3gb of my drive.
on the other hand, if it IS going to use the space themn plez tell me what for AND what the optimum size should be.
3)
no-body mentioned it needing a reiserfs partition. ok, if i had been more knoppix savy then i might have guessed. but instructions should not be written for the savy - they should be written for noobs.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Seagate ST6000NM0115 6TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$159.99

Seagate Exos X14 10TB 7200RPM 3.5" SAS 12Gb/s Hard Drive HDD ST10000NM0528
$165.00

Seagate 14TB Exos X14 7200RPM SATA 6Gb/s 256MB 3.5" Enterprise HDD ST14000NM0408
$354.99

New Western Digital WD40EFPX 68C6CN0 4TB 3.5" SATA III Internal NAS Red Plus HDD
$137.59

Seagate Enterprise Capacity 2TB 2.5in SATA Internal HDD ST2000NX0403
$60.00

HGST HUS724040ALA640 4TB 7200 RPM SATA 3.5" Internal Desktop Drive 100% Health
$78.00

ST6000NM0034 DELL 6TB 7.2K 12G SAS 512E 3.5" ENTERPRISE HARD DRIVE 8D1V4 08D1V4
$54.99

Dell ST91000640SS 1TB 2.5" 6Gb/s 64MB 7.2K RPM SAS Hard Drive Dell P/N: 0VXTPX
$16.99

Seagate Exos X16 ST10000NM010G 10TB 7200RPM SAS 12Gb/s 3.5" 512e/4Kn HDD
$199.00

HDD 3.5" SATA Hard Drive with Windows 10/Win 11 64x Installed Legacy
$35.00