Which install method has you used and which Knoppix version?
I installed knoppix on a 32gb usb stick and I know want to install some other software but it says I only have 1gb free.
How can I increase the size of knoppix to the full 32gb?
Which install method has you used and which Knoppix version?
In this case it's a problem of Pendrive, not of Knoppix.
I would suggest to use the Knoppix methods.
The size of the overlay (file or partition) depends on what you want to store of personal Linux stuff - configuration files, additional installed tools and so on. The remainig part within the FAT32 partition you can also use under Windows. I recommend to create a new folder in the directory 'mnt-system' and call it for example "privat_Windows".
Hi. 4gb is the maximum size for the persistent file or partition. Also, if you're trying to use the usb stick as a mass media storage while knoppix is running from that same drive, you just can't. It is sort of "locked" while the operating system is running.
This isn't quite right. 4GB is the maximum for a single file within FAT32 and therefore the limit for the persistent memory file. But the remaining part of the 1st and single FAT32 partition (in case of flash disk install with overlay file) you can use otherwise - also with a 32GB stick.Hi. 4gb is the maximum size for the persistent file or partition.
In case of flash disk install with overlay partition you can use all the space of the 2nd ReiserFS partition without size limitation.What do you mean by this? Knoppix can use all the free space within FAT32 or within ReiserFS as a storage.Also, if you're trying to use the usb stick as a mass media storage while knoppix is running from that same drive, you just can't. It is sort of "locked" while the operating system is running.
But please use the Knoppix install methods to prevent problems, not Pendrive, USB Creator and so on.
Your postings are strange and without reference to the answers you have got.
I close the thread.

HP ProLiant MicroServer Gen8 G1610T @2.3 GHz, 16GB, 712317-001 NO HDD/OS
$199.00
Supermicro 1U Network Server Appliance 16GB RAM 800GB SSD 6 LAN Ports Powers On
$450.00
Nasuni NF-50 Supermicro Server, Atom CPU C2558, @ 2.40GHz, 8GB RAM-No HDD/OS/AC
$250.00
Supermicro CSE-937 3U Storage Chassis No CPU No HDD No Ram Tested & Reset
$129.99
Supermicro 2U X10DRU-i 2x E5-2680 v3 2.5ghz 32gb Ram 240gb SSD 2x GPU *READ*
$369.99
New Barebones Supermicro 5019D Server, 4C/8T Xeon D-2123T, 1U Rackmountable, 10G
$449.99
Supermicro SYS-E302-9A Fanless Firewall Atom C3558 16GB ECC 64GB SSD 6x GbE i350
$325.00
1U Edge Firewall Server X11SCW-F Xeon E-2174G 0 RAM M.2 NVME 3x PCI-e 2x PSU X
$175.00
$280.00
Supermicro CSE-937 3U Storage Chassis No CPU No HDD No Ram Tested & Reset
$129.99