-
Senior Member
registered user
.
I am all out of ideas.
It is my experience that it is default Knoppix LiveUSB-with-persistence behaviour that volume control setting changes, by either of the guis that arise from either right-click or left-click of the panel speaker icon, are retained via persistence on reboot.
lspci | grep audio indicates my audio device is an
Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03).
If you were to make an new KNOPPIX LiveUSB with persistence, made no change in its initial configuration, and if your audio device is like mine, I can see no reason your LiveUSB would act differently than mine.
If your hardware or software configuration differs from mine, then obviously some configuration difference may explain a performance difference. ANY difference in configuration may explain different performance. You are in the best position to know what differences there might be in your configuration and a default Knoppix configuration.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM
$699.00

Dell PowerEdge FC430 Blade Server 2x Xeon E5-2630v4 20 Cores FX2 FX2s No RAM/HDD
$119.99

Dell PowerEdge M630 Blade Server 2x Xeon E5-2680 v4, 2F3MP , 4GDP5 ,R10KJ ,JVFVR
$95.20

Dell PowerEdge M620 Blade Server 2x Xeon E5-2680v2 2.8ghz 20-Cores | 128GB
$149.99

NETAPP HCI NAF-1701 SuperMicro Server 4X BLADE H410C 8X GOLD 5120 4 NODE SERVER
$1499.97

Datto S4P10 1U Blade Rack Server Intel Xeon D-2143IT 2.20GHz 48GB DDR4 4-Bay PSU
$229.95

Dell Poweredge C6400 24x 2.5’’ 2x 2400W 4x C6420 Nodes H330 | 2x SFP | 8x Trays
$799.99

Dell PowerEdge VRTX 2.5"x25 Bay Blade Enclosure 4x1600W + 4X M640 (4X Blades)
$1599.99

Dell PowerEdge M640 Blade Barebone Server Dell P/N: HHB006 Tested Working
$149.99

Dell Poweredge VRTX 25Bay 2.5" 2x PERC 8, 2xCMC, I/O 1GB Pass Through, 4x PS
$578.08