Ciao,
I have a question to an error during boot CD KNOPPIX 3.2

boot: knoppix xmodule=nv nodde nosmp mem=384M

ERROR:

initrd extends beyond end of memory (0x0dff397f>0x0dff0000)
Kernel Panic: VFS: unable to mount root fs on 01:01

boot: expert mem=384M

ERROR:

PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router VIA [1106/0686] at 00:04.0
PCI: Disabling via external APIC routing
isapnp: Scanning for PnP cards ....
isapnp: No Plug&Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Compute Society NET 3.309
Initializing RT netlink socket
Starting Kswapd
VFS: Disk quotas vdquot_6.5.1
vesafb: framebuffer at 0xe0000000, mapped to 0xd880d000, size 32768k
vesafb: mode is 1024x768x16, line lenght02048, pages020
vesafb: protected mode interface info c000:0256
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PID modes; override with idebus=xx
VP_IDE: IDE Controller on PCI bus 00 dev 21
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686a (rev22) IDE UDMA66 controller on pci00:04.1
ide0: BM-DMA at 0xd800-0xd807, BIOS setting: hdaMA, hdbio
ide1: BM-DMA at 0xd808-0xd80f, BIOS setting: hdcio, hddMA
PDC 20265: IDE controller on PCI bus 00 dev 88
PCI: Found IRQ 10 for device 00:11.0
PDC 20265: chipset revision 2
PDC20265: not 100% native mode: will probe irqs later
PDC20265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode
ide2: BM-DMA at 0x8400-0x8407, BIOS settings: hdeio, hdfio
ide3: BM-DMA at 0x8408-0x840f, BIOS settings: hdgio, hdhio
hda: PLEXTOR CD-R PX-W4824A, ATAPI CD/DVD-ROM drive
hdd: CD-ROM 50x, ATAPI CD/DVD-ROM drive
hde: Maxtor 6E040L0
hdf: QUANTUM FIREBALL LM20.5, ATA DISK drive
ide 0 at 0x1f0-0x1f7, 0x3f6 on irq 14
ide 1 at 0x170-0x177, 0x376 on irq 15
ide 2 at 0x9800-0x9807, 0x9402 on ird 10
Spurious 8259A interrupt: IRQ7


I have tested this CD with various Cheatcodes but the error is the same;
I have installed Knoppix on friend PC and it go!!!!

Looking forward to hearing from you,

Grazie. IVAN

My e-mail

[email protected]
or
[email protected]
or
[email protected]