-
kernel panic whilst creating dirs and symlinks on ramdisk
Im using Knoppix 3.1 2002-12-10. I have an ide hard drive and an ide cd-rom.
The boot process seem fine until it gets to "Creating directories and symlinks on ramdisk...". It pauses for a while then I get these errors
scsi: aborting command due to timeout: pid 74, scsi0, channel 0, id 0, lun 0 Read (10) 00 00 05 4d 68 00 00 08 00
hdd: timeout waiting for DMA
hdd: ide_dma_timeout: Lets do it again!stat = 0xd0, dma_stat = 0x60
hdd: DMA disabled
Unable to handle kernel NULL pointer dereference at virtual address 00000018
At which point the kernel panics and it doesnt progress any further.
The cd-rom is /dev/hdd, but Knoppix says its "Accessing KNOPPIX CDROM at /dev/scd0...". So I was wondering if it was the ide-scsi emulation that was causing this problem. I have no scsi devices in my machine so I tried the boot command
knoppix noscsi nodma
but the same thing happens. I have had SuSE installed on the same machine for a long time so Im sure the setup can be supported.
Any pointers in the right direction would be very helpful
-
Senior Member
registered user
most likely a cdrom read error, so check the cd itself, and the drive. I'm pretty sure there is no way to turn off scsi emulation, but i don't think it will make a difference.
-
Ah yes, I swapped the cd drive with another one and now it works perfectly. Its a bit ironic that the original drive was the one I used to burn the cd in the first place, ah well its old and i guess its on its way out
Thanks a lot for the help
Similar Threads
-
By gitarzysta in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 06-03-2004, 08:36 PM
-
By ckassab in forum General Support
Replies: 0
Last Post: 02-04-2004, 11:28 PM
-
By coladicooka in forum Customising & Remastering
Replies: 5
Last Post: 10-23-2003, 02:10 AM
-
By tji in forum Customising & Remastering
Replies: 4
Last Post: 06-12-2003, 06:40 PM
-
By tukun in forum General Support
Replies: 1
Last Post: 05-28-2003, 08:03 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

SFP TO RJ45 TRANSCEIVER SFP MODULE COPPER SFP OPTICAL PORT TO RJ45 ETHERNET PORT
$7.99

Dell Intel X710-DA2 5N7Y5 Dual-Port 10GbE SFP+ PCIe 3.0 x8 Network Adapter
$27.50

Cisco Acacia DP04QSDD-E25-840 400G QSFP-DD Coherent DCO Transceiver Module
$699.99

NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*
$24.00

Genuine Cisco SFP-10G-SR 0-2415-03 10 Gigabit Transceiver
$5.40

Intel X520-DA2 10Gb 10Gbe 10 Gigabit Network Adapter NIC Dual Port E10G42BTDA
$28.94

HP 560SFP+ 10GB 2-port PCIe NIC Ethernet ADAPTER 669279-001 w/ (2) 10GB SFP+
$16.99

Lot of 5 Cisco 10G SFP+ 850nm 300m Transceiver Module P/N: SFP-10G-SR-10-2415-03
$15.00

Dell 10 Gigabit SFP+ SR Transceiver 0XYD50 NEW SEALED
$24.99

Arista SFP-10G-SR 10GBASE-SR XVR-10001-20 850nm SFP+ Optical Transceiver
$30.00