-
kernel panic whilst creating dirs and symlinks on ramdisk
Im using Knoppix 3.1 2002-12-10. I have an ide hard drive and an ide cd-rom.
The boot process seem fine until it gets to "Creating directories and symlinks on ramdisk...". It pauses for a while then I get these errors
scsi: aborting command due to timeout: pid 74, scsi0, channel 0, id 0, lun 0 Read (10) 00 00 05 4d 68 00 00 08 00
hdd: timeout waiting for DMA
hdd: ide_dma_timeout: Lets do it again!stat = 0xd0, dma_stat = 0x60
hdd: DMA disabled
Unable to handle kernel NULL pointer dereference at virtual address 00000018
At which point the kernel panics and it doesnt progress any further.
The cd-rom is /dev/hdd, but Knoppix says its "Accessing KNOPPIX CDROM at /dev/scd0...". So I was wondering if it was the ide-scsi emulation that was causing this problem. I have no scsi devices in my machine so I tried the boot command
knoppix noscsi nodma
but the same thing happens. I have had SuSE installed on the same machine for a long time so Im sure the setup can be supported.
Any pointers in the right direction would be very helpful
-
Senior Member
registered user
most likely a cdrom read error, so check the cd itself, and the drive. I'm pretty sure there is no way to turn off scsi emulation, but i don't think it will make a difference.
-
Ah yes, I swapped the cd drive with another one and now it works perfectly. Its a bit ironic that the original drive was the one I used to burn the cd in the first place, ah well its old and i guess its on its way out
Thanks a lot for the help
Similar Threads
-
By gitarzysta in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 06-03-2004, 08:36 PM
-
By ckassab in forum General Support
Replies: 0
Last Post: 02-04-2004, 11:28 PM
-
By coladicooka in forum Customising & Remastering
Replies: 5
Last Post: 10-23-2003, 02:10 AM
-
By tji in forum Customising & Remastering
Replies: 4
Last Post: 06-12-2003, 06:40 PM
-
By tukun in forum General Support
Replies: 1
Last Post: 05-28-2003, 08:03 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Gigabyte 4U AI Server 10x Nvidia GPU 2x Xeon Gold 6150 36 Core 2.7GHz DDR4 RAM
$1625.00

Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD
$275.00

867959-B21 HPE ProLiant DL360 G10 CTO Server W/ 2x 865414-B21 1x 840140-001
$245.00

Dell PowerEdge R530 2x E5-2630v4 H330 iDRAC8 Port Card Riser No PSU/RAM/HDD
$99.99

Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W
$409.99

Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD
$378.93

Dell Poweredge R730xd 12LFF 2*2660v4 4*1Gbe h730 2x 750W Server CTO
$308.00

Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2690 v3 | 64gb Ram | 2x 1600W
$524.99

Microsoft Windows Server 2025 Standard 64Bit 16 Core-50 CALs DVD With Key Sealed
$94.95

Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM
$699.00