most likely a cdrom read error, so check the cd itself, and the drive. I'm pretty sure there is no way to turn off scsi emulation, but i don't think it will make a difference.
Im using Knoppix 3.1 2002-12-10. I have an ide hard drive and an ide cd-rom.
The boot process seem fine until it gets to "Creating directories and symlinks on ramdisk...". It pauses for a while then I get these errors
scsi: aborting command due to timeout: pid 74, scsi0, channel 0, id 0, lun 0 Read (10) 00 00 05 4d 68 00 00 08 00
hdd: timeout waiting for DMA
hdd: ide_dma_timeout: Lets do it again!stat = 0xd0, dma_stat = 0x60
hdd: DMA disabled
Unable to handle kernel NULL pointer dereference at virtual address 00000018
At which point the kernel panics and it doesnt progress any further.
The cd-rom is /dev/hdd, but Knoppix says its "Accessing KNOPPIX CDROM at /dev/scd0...". So I was wondering if it was the ide-scsi emulation that was causing this problem. I have no scsi devices in my machine so I tried the boot command
knoppix noscsi nodma
but the same thing happens. I have had SuSE installed on the same machine for a long time so Im sure the setup can be supported.
Any pointers in the right direction would be very helpful
most likely a cdrom read error, so check the cd itself, and the drive. I'm pretty sure there is no way to turn off scsi emulation, but i don't think it will make a difference.
Ah yes, I swapped the cd drive with another one and now it works perfectly. Its a bit ironic that the original drive was the one I used to burn the cd in the first place, ah well its old and i guess its on its way out![]()
Thanks a lot for the help![]()

Juniper MX204 +JUNOS and Dual Power Supply
$7299.99
Juniper EX2300 12-Port Gigabit PoE+ Managed Network Switch P/N: EX2300-C-12P
$149.99
🔀 Juniper Networks EX2300-C-12P 12× Gigabit PoE+ • 2× 10G SFP+ Compact Switch ⚡
$109.99
Juniper EX3400-24P 24-Port PoE+ GbE + 4-Port 1/10Gb SFP Switch
$245.00
Juniper QFX5120-32C-AFI 32x100GbE Switch Dual AC Airflow In, Rail Kit Included
$8995.00
Juniper Networks MX204-HW-BASE *BRAND NEW FACTORY SEALED* READ DETAILS
$8199.99
Juniper QFX5120-48Y-AFO 48 x 1/10/25GB SFP28 + 8 x 40/100GB Switch w/Dual AC
$10499.99
Juniper EX2300-C 12 Port Compact Gigabit Switch EX2300-C-12p Discounted Cosmetic
$79.86
Juniper QFX5100-48S-3AFI 48-Port SFP+ 6 QSFP+ 2x SFP/RJ-45 Management
$249.97
Juniper Networks Mist Wireless Access Points, Model AP45
$59.99