Results 1 to 2 of 2

Thread: Changing Settings

  1. #1
    Junior Member
    Join Date
    Oct 2003
    Posts
    1

    Changing Settings

    I downloaded knoppix a while ago and think this is awesome. I have windows on my computer and have been booting to a knoppix cd. The settings on the cd will not allow me to write to my hard drive for some reason, it will let me read though. My partitions are Fat32 btw.

    I right clicked on one of the partitions on my desktop and tried to change the read write permissions. It allowed me to change them but I was still unabled to write to the disk.

    Two simple questions
    1. While in knoppix is there some way to change the settings so I can write to the disk?
    2. How can i change the settings on the cd. Obviously i will need to make a new cd but where can I look for that?

    A third question a bit off topic but I figured I would throw it in.
    3. What would one need to do to make a cd that would load an OS other then Knoppix? like red hat, xp, or 98? I have a dvd burner and figured maybe I might need to burn it to a dvd for size reasons? Probably too advanced but wanted to know anyway.

    Thanks in advance

    Brett

  2. #2
    Senior Member registered user
    Join Date
    May 2003
    Location
    Utrecht, The Netherlands
    Posts
    298

    Re: Changing Settings

    Quote Originally Posted by thedude
    I downloaded knoppix a while ago and think this is awesome. I have windows on my computer and have been booting to a knoppix cd. The settings on the cd will not allow me to write to my hard drive for some reason, it will let me read though. My partitions are Fat32 btw.

    I right clicked on one of the partitions on my desktop and tried to change the read write permissions. It allowed me to change them but I was still unabled to write to the disk.

    Two simple questions
    1. While in knoppix is there some way to change the settings so I can write to the disk?
    it should work using the icons, but you might also mount them read/write try "man mount" for info about that, or google it, I dont know the exact command but it shouldnt be difficult...

    2. How can i change the settings on the cd. Obviously i will need to make a new cd but where can I look for that?

    A third question a bit off topic but I figured I would throw it in.
    3. What would one need to do to make a cd that would load an OS other then Knoppix? like red hat, xp, or 98? I have a dvd burner and figured maybe I might need to burn it to a dvd for size reasons? Probably too advanced but wanted to know anyway.

    Thanks in advance

    Brett
    for the second and third question, you want to make a remaster... check the forums for info about that, there is enough. but its quite difficult (at least if you know as much about linux as I do, and I guess you know less)

Similar Threads

  1. Changing BIOS settings
    By clayfaris in forum General Support
    Replies: 3
    Last Post: 09-24-2004, 04:43 PM
  2. Keeping Settings
    By ron2big in forum General Support
    Replies: 1
    Last Post: 08-01-2004, 07:24 PM
  3. general strategy for changing settings w/o hd install ?
    By chrsjav in forum General Support
    Replies: 0
    Last Post: 10-12-2003, 04:49 PM
  4. How to keep your settings?
    By SenateDC in forum General Support
    Replies: 1
    Last Post: 03-28-2003, 09:14 PM
  5. Changing HDA1 settings without KDE........(newbie)
    By Frits Plotseling in forum Hardware & Booting
    Replies: 3
    Last Post: 03-07-2003, 05:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Genuine Cisco SFP-10G-SR 0-2415-03 10 Gigabit Transceiver picture

Genuine Cisco SFP-10G-SR 0-2415-03 10 Gigabit Transceiver

$5.40



Cisco SFP-10G-LR-S Reset & Tested Lot of 2 picture

Cisco SFP-10G-LR-S Reset & Tested Lot of 2

$32.99



NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping* picture

NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*

$24.00



Ubiquiti Unifi USW PRO AGGREGATION 28x10Gbe 4x25Gbe QSFP28 Layer 3 Switch picture

Ubiquiti Unifi USW PRO AGGREGATION 28x10Gbe 4x25Gbe QSFP28 Layer 3 Switch

$700.00



SFP TO RJ45 TRANSCEIVER SFP MODULE COPPER SFP OPTICAL PORT TO RJ45 ETHERNET PORT picture

SFP TO RJ45 TRANSCEIVER SFP MODULE COPPER SFP OPTICAL PORT TO RJ45 ETHERNET PORT

$7.99



Intel X520-DA2 10Gb 10Gbe 10 Gigabit Network Adapter NIC Dual Port E10G42BTDA picture

Intel X520-DA2 10Gb 10Gbe 10 Gigabit Network Adapter NIC Dual Port E10G42BTDA

$28.94



HP 560SFP+ 10GB 2-port  PCIe NIC Ethernet ADAPTER 669279-001 w/ (2) 10GB SFP+ picture

HP 560SFP+ 10GB 2-port PCIe NIC Ethernet ADAPTER 669279-001 w/ (2) 10GB SFP+

$16.99



Ruckus ICX7550-24F-E2, 24 ports of 1/10GbE SFP+ & 2 ports of 40/100GbE QSFP28 picture

Ruckus ICX7550-24F-E2, 24 ports of 1/10GbE SFP+ & 2 ports of 40/100GbE QSFP28

$8995.00



Cisco Acacia DP04QSDD-E25-840 400G QSFP-DD Coherent DCO Transceiver Module picture

Cisco Acacia DP04QSDD-E25-840 400G QSFP-DD Coherent DCO Transceiver Module

$699.99



Ubiquiti Unifi USW PRO AGGREGATION 28x10Gbe 4x25Gbe QSFP28 Layer 3 Switch picture

Ubiquiti Unifi USW PRO AGGREGATION 28x10Gbe 4x25Gbe QSFP28 Layer 3 Switch

$750.00