By the way. I tried disabling legacy USB support in the BIOS and I tried noacpi (or whatever). Neither of these things resolved my problem. Is there something else to try?
Hi:
I tried Knoppix 3.3 at home yesterday and *everything* worked. There was a minor problem with CUPS, but that went away some how.I was most impressed by my printer, I've been trying to get it to work under Mandrake 8.2 for ages. Anyway, thanks, great job!
Here's the problem. I thought I'd show my friends at work how great Linux is, so before calling them all over to my desk, I checked to make sure it actually worked on my machine first. Good thing I did! My keyboard does not work properly. Sometimes it ignores keystrokes, other times it is ok, and yet other times it repeats the keystroke a number of times. Couldn't show them that, obviously.
My keyboard is a "Chicony KU-9943 with hub". Their website is http://www.chicony.com . I did a "lspci -v" and a "lsmod"; they are attached below. Is there anyway to resolve this problem with a boot parameter perhaps? I'd really like to be able to show everyone the amazing job you did.
Thanks.
#################
00:00.0 Host bridge: Intel Corp. 82810 GMCH [Graphics Memory Controller Hub] (rev 03)
Flags: bus master, fast devsel, latency 0
00:01.0 VGA compatible controller: Intel Corp. 82810 CGC [Chipset Graphics Controller] (rev 03) (prog-if 00 [VGA])
Subsystem: Intel Corp.: Unknown device 7123
Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 10
Memory at f8000000 (32-bit, prefetchable) [size=64M]
Memory at f4000000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <available only to root>
00:1e.0 PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f4100000-f41fffff
00:1f.0 ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 02)
Flags: bus master, medium devsel, latency 0
00:1f.1 IDE interface: Intel Corp. 82801AA IDE (rev 02) (prog-if 80 [Master])
Subsystem: Intel Corp. 82801AA IDE
Flags: bus master, medium devsel, latency 0
I/O ports at 10a0 [size=16]
00:1f.2 USB Controller: Intel Corp. 82801AA USB (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corp. 82801AA USB
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at 1080 [size=32]
00:1f.3 SMBus: Intel Corp. 82801AA SMBus (rev 02)
Subsystem: Intel Corp. 82801AA SMBus
Flags: medium devsel, IRQ 9
I/O ports at 10b0 [size=16]
01:09.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
Subsystem: Ensoniq Creative Sound Blaster AudioPCI128
Flags: bus master, slow devsel, latency 96, IRQ 9
I/O ports at 2000 [size=64]
Capabilities: <available only to root>
01:0a.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 64)
Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100
Flags: bus master, medium devsel, latency 80, IRQ 10
I/O ports at 2080 [size=128]
Memory at f4100000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: <available only to root>
############
Module Size Used by Not tainted
nls_cp437 4380 1 (autoclean)
i810 63776 10
agpgart 38296 7 (autoclean)
autofs4 8756 1 (autoclean)
af_packet 13448 0 (autoclean)
nls_iso8859-1 2876 1 (autoclean)
ntfs 51168 0 (autoclean)
msdos 4652 0 (autoclean)
es1371 30152 0
gameport 1388 0 [es1371]
ac97_codec 11916 0 [es1371]
soundcore 3428 4 [es1371]
3c59x 25936 0
i810_rng 2660 0 (unused)
serial 52004 0 (autoclean)
keybdev 1696 0 (unused)
mousedev 3832 1
hid 21380 0 (unused)
input 3168 0 [keybdev mousedev hid]
usb-uhci 21868 0 (unused)
usbcore 57472 1 [hid usb-uhci]
apm 9768 2
rtc 6940 0 (autoclean)
cloop 9092 2
By the way. I tried disabling legacy USB support in the BIOS and I tried noacpi (or whatever). Neither of these things resolved my problem. Is there something else to try?
Has anyone else had flaky keyboard problems? Am I the only one?
The output from dmesg is:
>input,hiddev0: USB HID v1.00 Device [Chicony USB HUB keyboard] on usb1:9.1
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: get_hub_status failed
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: get_hub_status failed
usbdevfs: USBDEVFS_CONTROL failed dev 9 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 9 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 9 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 9 rqt 128 rq 6 len 18 ret -84
usb.c: USB disconnect on device 00:1f.2-1.1 address 9
hub.c: new USB device 00:1f.2-1.1, assigned address 10
input: USB HID v1.00 Keyboard [Chicony USB HUB keyboard] on usb1:10.0
usb_control/bulk_msg: timeout
usb-uhci.c: interrupt, status 2, frame# 904
input,hiddev0: USB HID v1.00 Device [Chicony USB HUB keyboard] on usb1:10.1
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: get_hub_status failed
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: get_hub_status failed
usbdevfs: USBDEVFS_CONTROL failed dev 10 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 10 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 10 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 10 rqt 128 rq 6 len 18 ret -84
usb.c: USB disconnect on device 00:1f.2-1.1 address 10
hub.c: new USB device 00:1f.2-1.1, assigned address 11
input: USB HID v1.00 Keyboard [Chicony USB HUB keyboard] on usb1:11.0
usb_control/bulk_msg: timeout
usb-uhci.c: interrupt, status 2, frame# 396
input,hiddev0: USB HID v1.00 Device [Chicony USB HUB keyboard] on usb1:11.1
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: get_hub_status failed
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: get_hub_status failed
usbdevfs: USBDEVFS_CONTROL failed dev 11 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 11 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 11 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 11 rqt 128 rq 6 len 18 ret -84
usb.c: USB disconnect on device 00:1f.2-1.1 address 11
hub.c: new USB device 00:1f.2-1.1, assigned address 12
input: USB HID v1.00 Keyboard [Chicony USB HUB keyboard] on usb1:12.0
usb_control/bulk_msg: timeout
usb-uhci.c: interrupt, status 2, frame# 1865
input,hiddev0: USB HID v1.00 Device [Chicony USB HUB keyboard] on usb1:12.1
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: get_hub_status failed
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: get_hub_status failed
usbdevfs: USBDEVFS_CONTROL failed dev 12 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 12 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 12 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 12 rqt 128 rq 6 len 18 ret -84
usb.c: USB disconnect on device 00:1f.2-1.1 address 12
hub.c: new USB device 00:1f.2-1.1, assigned address 13
input: USB HID v1.00 Keyboard [Chicony USB HUB keyboard] on usb1:13.0
usb_control/bulk_msg: timeout
usb-uhci.c: interrupt, status 2, frame# 1367
input,hiddev0: USB HID v1.00 Device [Chicony USB HUB keyboard] on usb1:13.1
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: get_hub_status failed
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: get_hub_status failed
usbdevfs: USBDEVFS_CONTROL failed dev 13 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 13 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 13 rqt 128 rq 6 len 18 ret -84
usb.c: USB disconnect on device 00:1f.2-1.1 address 13
hub.c: new USB device 00:1f.2-1.1, assigned address 14
input: USB HID v1.00 Keyboard [Chicony USB HUB keyboard] on usb1:14.0
usb_control/bulk_msg: timeout
usb-uhci.c: interrupt, status 2, frame# 899
input,hiddev0: USB HID v1.00 Device [Chicony USB HUB keyboard] on usb1:14.1
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: get_hub_status failed
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: get_hub_status failed
usbdevfs: USBDEVFS_CONTROL failed dev 14 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 14 rqt 128 rq 6 len 18 ret -84
usb.c: USB disconnect on device 00:1f.2-1.1 address 14
hub.c: new USB device 00:1f.2-1.1, assigned address 15
input: USB HID v1.00 Keyboard [Chicony USB HUB keyboard] on usb1:15.0
usb_control/bulk_msg: timeout
usb-uhci.c: interrupt, status 2, frame# 351
input,hiddev0: USB HID v1.00 Device [Chicony USB HUB keyboard] on usb1:15.1
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: get_hub_status failed
usbdevfs: USBDEVFS_CONTROL failed dev 15 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 15 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 15 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 15 rqt 128 rq 6 len 18 ret -84
usb.c: USB disconnect on device 00:1f.2-1.1 address 15
hub.c: new USB device 00:1f.2-1.1, assigned address 16
input: USB HID v1.00 Keyboard [Chicony USB HUB keyboard] on usb1:16.0
usb_control/bulk_msg: timeout
usb-uhci.c: interrupt, status 2, frame# 18
input,hiddev0: USB HID v1.00 Device [Chicony USB HUB keyboard] on usb1:16.1
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: get_hub_status failed
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: get_hub_status failed
usbdevfs: USBDEVFS_CONTROL failed dev 16 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 16 rqt 128 rq 6 len 18 ret -84
usb.c: USB disconnect on device 00:1f.2-1.1 address 16
hub.c: new USB device 00:1f.2-1.1, assigned address 17
input: USB HID v1.00 Keyboard [Chicony USB HUB keyboard] on usb1:17.0
usb_control/bulk_msg: timeout
usb-uhci.c: interrupt, status 2, frame# 1385
input,hiddev0: USB HID v1.00 Device [Chicony USB HUB keyboard] on usb1:17.1
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: get_hub_status failed
usbdevfs: USBDEVFS_CONTROL failed dev 17 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 17 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 17 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 17 rqt 128 rq 6 len 18 ret -84
usb.c: USB disconnect on device 00:1f.2-1.1 address 17
hub.c: new USB device 00:1f.2-1.1, assigned address 18
input: USB HID v1.00 Keyboard [Chicony USB HUB keyboard] on usb1:18.0
usb_control/bulk_msg: timeout
usb-uhci.c: interrupt, status 2, frame# 894
input,hiddev0: USB HID v1.00 Device [Chicony USB HUB keyboard] on usb1:18.1
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: get_hub_status failed
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: get_hub_status failed
usbdevfs: USBDEVFS_CONTROL failed dev 18 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 18 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 18 rqt 128 rq 6 len 18 ret -84
usb.c: USB disconnect on device 00:1f.2-1.1 address 18
usbdevfs: USBDEVFS_CONTROL failed dev 18 rqt 128 rq 6 len 18 ret -84
hub.c: new USB device 00:1f.2-1.1, assigned address 19
input: USB HID v1.00 Keyboard [Chicony USB HUB keyboard] on usb1:19.0
usb_control/bulk_msg: timeout
usb-uhci.c: interrupt, status 2, frame# 366
input,hiddev0: USB HID v1.00 Device [Chicony USB HUB keyboard] on usb1:19.1
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: get_hub_status failed
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: get_hub_status failed
usbdevfs: USBDEVFS_CONTROL failed dev 19 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 19 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 19 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 19 rqt 128 rq 6 len 18 ret -84
usb.c: USB disconnect on device 00:1f.2-1.1 address 19
hub.c: new USB device 00:1f.2-1.1, assigned address 20
input: USB HID v1.00 Keyboard [Chicony USB HUB keyboard] on usb1:20.0
usb_control/bulk_msg: timeout
usb-uhci.c: interrupt, status 2, frame# 1806
input,hiddev0: USB HID v1.00 Device [Chicony USB HUB keyboard] on usb1:20.1
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: get_hub_status failed
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: get_hub_status failed
usbdevfs: USBDEVFS_CONTROL failed dev 20 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 20 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 20 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 20 rqt 128 rq 6 len 18 ret -84
usb.c: USB disconnect on device 00:1f.2-1.1 address 20
hub.c: new USB device 00:1f.2-1.1, assigned address 21
input: USB HID v1.00 Keyboard [Chicony USB HUB keyboard] on usb1:21.0
usb_control/bulk_msg: timeout
usb-uhci.c: interrupt, status 2, frame# 1137
input,hiddev0: USB HID v1.00 Device [Chicony USB HUB keyboard] on usb1:21.1
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: get_hub_status failed
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: get_hub_status failed
usbdevfs: USBDEVFS_CONTROL failed dev 21 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 21 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 21 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 21 rqt 128 rq 6 len 18 ret -84
usb.c: USB disconnect on device 00:1f.2-1.1 address 21
hub.c: new USB device 00:1f.2-1.1, assigned address 22
input: USB HID v1.00 Keyboard [Chicony USB HUB keyboard] on usb1:22.0
usb_control/bulk_msg: timeout
usb-uhci.c: interrupt, status 2, frame# 559
input,hiddev0: USB HID v1.00 Device [Chicony USB HUB keyboard] on usb1:22.1
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: get_hub_status failed
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: get_hub_status failed
usbdevfs: USBDEVFS_CONTROL failed dev 22 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 22 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 22 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 22 rqt 128 rq 6 len 18 ret -84
usb.c: USB disconnect on device 00:1f.2-1.1 address 22
hub.c: new USB device 00:1f.2-1.1, assigned address 23
input: USB HID v1.00 Keyboard [Chicony USB HUB keyboard] on usb1:23.0
usb_control/bulk_msg: timeout
usb-uhci.c: interrupt, status 2, frame# 1929
input,hiddev0: USB HID v1.00 Device [Chicony USB HUB keyboard] on usb1:23.1
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: get_hub_status failed
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: get_hub_status failed
usbdevfs: USBDEVFS_CONTROL failed dev 23 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 23 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 23 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 23 rqt 128 rq 6 len 18 ret -84
usb.c: USB disconnect on device 00:1f.2-1.1 address 23
hub.c: new USB device 00:1f.2-1.1, assigned address 24
input: USB HID v1.00 Keyboard [Chicony USB HUB keyboard] on usb1:24.0
usb_control/bulk_msg: timeout
usb-uhci.c: interrupt, status 2, frame# 1341
input,hiddev0: USB HID v1.00 Device [Chicony USB HUB keyboard] on usb1:24.1
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: get_hub_status failed
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: get_hub_status failed
usbdevfs: USBDEVFS_CONTROL failed dev 24 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 24 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 24 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 24 rqt 128 rq 6 len 18 ret -84
usb.c: USB disconnect on device 00:1f.2-1.1 address 24
hub.c: new USB device 00:1f.2-1.1, assigned address 25
input: USB HID v1.00 Keyboard [Chicony USB HUB keyboard] on usb1:25.0
usb_control/bulk_msg: timeout
usb-uhci.c: interrupt, status 2, frame# 582
input,hiddev0: USB HID v1.00 Device [Chicony USB HUB keyboard] on usb1:25.1
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: get_hub_status failed
usbdevfs: USBDEVFS_CONTROL failed dev 25 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 25 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 25 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 25 rqt 128 rq 6 len 18 ret -84
usb.c: USB disconnect on device 00:1f.2-1.1 address 25
hub.c: new USB device 00:1f.2-1.1, assigned address 26
input: USB HID v1.00 Keyboard [Chicony USB HUB keyboard] on usb1:26.0
usb_control/bulk_msg: timeout
usb-uhci.c: interrupt, status 2, frame# 2032
input,hiddev0: USB HID v1.00 Device [Chicony USB HUB keyboard] on usb1:26.1
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: get_hub_status failed
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: usb_hub_port_status (2) failed (err = -84)
hub.c: get_hub_status failed
usbdevfs: USBDEVFS_CONTROL failed dev 26 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 26 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 26 rqt 128 rq 6 len 18 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 26 rqt 128 rq 6 len 18 ret -84
usb.c: USB disconnect on device 00:1f.2-1.1 address 26
hub.c: new USB device 00:1f.2-1.1, assigned address 27
input: USB HID v1.00 Keyboard [Chicony USB HUB keyboard] on usb1:27.0

SFP TO RJ45 TRANSCEIVER SFP MODULE COPPER SFP OPTICAL PORT TO RJ45 ETHERNET PORT
$7.99
NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*
$24.00
Dell Intel X710-DA2 5N7Y5 Dual-Port 10GbE SFP+ PCIe 3.0 x8 Network Adapter
$27.50
HPE 560SFP 2x 10Gb SFP+ PCIe Both Profile Network Card 669279-001 665247-001
$14.90
Genuine Cisco SFP-10G-SR 0-2415-03 10 Gigabit Transceiver
$5.40
HP 560SFP+ 10GB 2-port PCIe NIC Ethernet ADAPTER 669279-001 w/ (2) 10GB SFP+
$16.99
Intel X520-DA2 10Gb 10Gbe 10 Gigabit Network Adapter NIC Dual Port E10G42BTDA
$33.94
Lot of 5 Genuine Cisco SFP-10G-SR 10G Base SFP+ Transceivers 10-2415-03 w/ Holo
$16.98
20 X New Cisco QSFP-100G-FR-W2 10-3659-01 Module Hologram Brand New 20 Pack
$299.00
Dell Mellanox ConnectX-4 Lx CX4121C 020NJD Dual-Port 25GbE SFP28 NIC Low Profile
$35.00