-
Knoppix 3.4 ct kernel update
I made an hdd install from the 3.4 ct and everything works fine.
I installed it with 2.6.1 Kernel as described somewhere here in the forum.
After the installation i applied some patches from kano.
Everything worked fine again.
But when it comes to installing the newest nvidia drivers on kanos site i am stuck.
The scripts exits without installing the drivers and corrupts my XFree config.
Then i supposed that it might need the kernel sources.
When i tried to download the sources for my 2.6.1 i found that apt-get only offers me sources for 2.6.3.
So i tried to apply the Kernel update 2.6.3 for Kanotix but without success it seems cause uname -r still reports 2.6.1 .
How can i patch my kernel to 2.6.3?
Thx in advance
jollyagp
-
Same problem here and when i tried to install a new kernel show me this:
I did apt-get install kernel-source-2.6.4
ln -s /usr/src/kernel-source.... linux (i tried linux-2.6.1 too)
and when i try to do make menuconfig show that:
root@boxer:/usr/src/kernel-source-2.6.4# make menuconfig
HOSTCC scripts/fixdep
En el fichero incluído de /usr/include/sys/socket.h:35,
de /usr/include/netinet/in.h:24,
de scripts/fixdep.c:107:
/usr/include/bits/socket.h:305:24: asm/socket.h: No existe el fichero o el directorio (file dont exist)
make[1]: *** [scripts/fixdep] Error 1
make: *** [scripts/fixdep] Error 2
Anybody got a "howto" to get nvidia drivers work in knoppix 3.4 whit kernel 2.6.1 or how to upgrade the kernel? Could post a link here please?.
Thnx.
-
Senior Member
registered user

Originally Posted by
Malo
root@boxer:/usr/src/kernel-source-2.6.4# make menuconfig
HOSTCC scripts/fixdep
En el fichero incluído de /usr/include/sys/socket.h:35,
de /usr/include/netinet/in.h:24,
de scripts/fixdep.c:107:
/usr/include/bits/socket.h:305:24: asm/socket.h: No existe el fichero o el directorio (file dont exist)
make[1]: *** [scripts/fixdep] Error 1
make: *** [scripts/fixdep] Error 2
I believe Dave tracked that down to a problem with the linux-kernel-headers so apt-get --reinstall install linux-kernel-headers to reinstall and hopefully get setup right this time.
Anybody got a "howto" to get nvidia drivers work in knoppix 3.4 whit kernel 2.6.1 or how to upgrade the kernel? Could post a link here please?.
Thnx.
You need to use the 5336 version of the Nvidia installer or go to http://www.minion.de and get the required patches for a 2.6 kernel for versions older than that.
Similar Threads
-
By dingil in forum Customising & Remastering
Replies: 0
Last Post: 09-19-2004, 04:49 PM
-
By Bazou in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 05-14-2004, 09:12 AM
-
By lmsaga in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 04-25-2004, 12:29 PM
-
By WankelWannabe in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 02-10-2003, 03:50 PM
-
By my2cents in forum General Support
Replies: 2
Last Post: 01-28-2003, 11:32 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

SFP TO RJ45 TRANSCEIVER SFP MODULE COPPER SFP OPTICAL PORT TO RJ45 ETHERNET PORT
$7.99

Dell Intel X710-DA2 5N7Y5 Dual-Port 10GbE SFP+ PCIe 3.0 x8 Network Adapter
$27.50

Cisco Acacia DP04QSDD-E25-840 400G QSFP-DD Coherent DCO Transceiver Module
$699.99

Cisco QSFP-40G-SR-BD Module 10-2945-02 NEW CLAMSHELL
$45.50

Genuine Cisco SFP-10G-SR 0-2415-03 10 Gigabit Transceiver
$5.40

Lot of 5 Cisco 10G SFP+ 850nm 300m Transceiver Module P/N: SFP-10G-SR-10-2415-03
$15.00

Intel X520-DA2 10Gb 10Gbe 10 Gigabit Network Adapter NIC Dual Port E10G42BTDA
$28.94

HP 560SFP+ 10GB 2-port PCIe NIC Ethernet ADAPTER 669279-001 w/ (2) 10GB SFP+
$16.99

NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*
$24.00

Dell 10 Gigabit SFP+ SR Transceiver 0XYD50 NEW SEALED
$24.99