-
Knoppix 3.4 ct kernel update
I made an hdd install from the 3.4 ct and everything works fine.
I installed it with 2.6.1 Kernel as described somewhere here in the forum.
After the installation i applied some patches from kano.
Everything worked fine again.
But when it comes to installing the newest nvidia drivers on kanos site i am stuck.
The scripts exits without installing the drivers and corrupts my XFree config.
Then i supposed that it might need the kernel sources.
When i tried to download the sources for my 2.6.1 i found that apt-get only offers me sources for 2.6.3.
So i tried to apply the Kernel update 2.6.3 for Kanotix but without success it seems cause uname -r still reports 2.6.1 .
How can i patch my kernel to 2.6.3?
Thx in advance
jollyagp
-
Same problem here and when i tried to install a new kernel show me this:
I did apt-get install kernel-source-2.6.4
ln -s /usr/src/kernel-source.... linux (i tried linux-2.6.1 too)
and when i try to do make menuconfig show that:
root@boxer:/usr/src/kernel-source-2.6.4# make menuconfig
HOSTCC scripts/fixdep
En el fichero incluído de /usr/include/sys/socket.h:35,
de /usr/include/netinet/in.h:24,
de scripts/fixdep.c:107:
/usr/include/bits/socket.h:305:24: asm/socket.h: No existe el fichero o el directorio (file dont exist)
make[1]: *** [scripts/fixdep] Error 1
make: *** [scripts/fixdep] Error 2
Anybody got a "howto" to get nvidia drivers work in knoppix 3.4 whit kernel 2.6.1 or how to upgrade the kernel? Could post a link here please?.
Thnx.
-
Senior Member
registered user

Originally Posted by
Malo
root@boxer:/usr/src/kernel-source-2.6.4# make menuconfig
HOSTCC scripts/fixdep
En el fichero incluído de /usr/include/sys/socket.h:35,
de /usr/include/netinet/in.h:24,
de scripts/fixdep.c:107:
/usr/include/bits/socket.h:305:24: asm/socket.h: No existe el fichero o el directorio (file dont exist)
make[1]: *** [scripts/fixdep] Error 1
make: *** [scripts/fixdep] Error 2
I believe Dave tracked that down to a problem with the linux-kernel-headers so apt-get --reinstall install linux-kernel-headers to reinstall and hopefully get setup right this time.
Anybody got a "howto" to get nvidia drivers work in knoppix 3.4 whit kernel 2.6.1 or how to upgrade the kernel? Could post a link here please?.
Thnx.
You need to use the 5336 version of the Nvidia installer or go to http://www.minion.de and get the required patches for a 2.6 kernel for versions older than that.
Similar Threads
-
By dingil in forum Customising & Remastering
Replies: 0
Last Post: 09-19-2004, 04:49 PM
-
By Bazou in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 05-14-2004, 09:12 AM
-
By lmsaga in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 04-25-2004, 12:29 PM
-
By WankelWannabe in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 02-10-2003, 03:50 PM
-
By my2cents in forum General Support
Replies: 2
Last Post: 01-28-2003, 11:32 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Supermicro 2U X10DRU-i 2x E5-2680 v3 2.5ghz 32gb Ram 240gb SSD 2x GPU *READ*
$369.99

HP ProLiant MicroServer Gen8 G1610T @2.3 GHz, 16GB, 712317-001 NO HDD/OS
$199.00

Supermicro E200-8D Barebones Server Chassis Xeon D-1528 X10SDV-6C-TLN4F 2x10GbE
$445.00

Nasuni NF-50 Supermicro Server, Atom CPU C2558, @ 2.40GHz, 8GB RAM-No HDD/OS/AC
$250.00

New Barebones Supermicro 5019D Server, 4C/8T Xeon D-2123T, 1U Rackmountable, 10G
$449.99

Supermicro 5019D-4C-FN8TP Xeon D-2123IT (4C/8T) 64GB DDR4 10GbE 480GB 1U Server
$689.00

1U Edge Firewall Server X11SCW-F Xeon E-2174G 0 RAM M.2 NVME 3x PCI-e 2x PSU X
$175.00

Supermicro 1027GR-TSF 1U Rackmount Server 2x Xeon 2.3GHz 128GB DDR3
$219.99

Supermicro 505-2 Server
$280.00

Supermicro CSE-937 3U Storage Chassis No CPU No HDD No Ram Tested & Reset
$129.99