Simple. You don't have a bootable disc. Check the md5sum of the .iso you burned and recheck your burning methods. You can find more info hereOriginally Posted by kevin7
recently, i hv download the knoppix 3.3...
My notebook is P4 1.4, 256DDR, 24x CD-rom, and winXP installed.
so, i follow the instructions, goto bios setup and select boot on cd-rom.
After that, i put in the knoppix live cd... the following are two method i've tried to boot the knoppix...
if i made the cd-rom boot first:
nothing was happed, the cd-rom did run for a minute it seem like something was working behind, but suddenly... it automatically load the windows just like nothing was happened.
if i disable the floppy and hd except cd-rom and cd-rom boot first:
a message told me tat it was an invalid system disk, put an valid one and press enter (the message is something like tat).
I just can't boot the knoppix... what is the problem?
thx a lot...
Simple. You don't have a bootable disc. Check the md5sum of the .iso you burned and recheck your burning methods. You can find more info hereOriginally Posted by kevin7
ricken~ i did check it for integrity, no problem at all, i've try to boot it on other computer, it somehow working...
but, i place it in my laptop, it was unable to boot... so, how was it?
thx!
Boot like this:
boot: knoppix testcd
If it returns "Everyting looks OK" or somesuch then it must be one of two things:
1) Burn it again at a slower speed
2) Try a different cdrom drive
i dun even can see the boot: ...
aisk~
uhm interesting one
1) have you tried booting the CD on another PC that you know boots OK from the CD![]()
2) have you tried to boot on your laptop with a known good booting CD, ie windows XP or other?![]()
3) with another distro that I had that would not boot I made a boot floppy and booted from that and got the CD running and installed. You can probably do the same with knoppix, but some one more experienced than I am will have to help you, if you cannot work it out for your self.![]()
HTH
yes... my knoppix cd is worked on other computer...
and my cd-rom able to boot xp...
i think i need a boot diskett... thx a lot

SFP TO RJ45 TRANSCEIVER SFP MODULE COPPER SFP OPTICAL PORT TO RJ45 ETHERNET PORT
$7.99
Dell Intel X710-DA2 5N7Y5 Dual-Port 10GbE SFP+ PCIe 3.0 x8 Network Adapter
$27.50
Cisco Acacia DP04QSDD-E25-840 400G QSFP-DD Coherent DCO Transceiver Module
$699.99
NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*
$24.00
Genuine Cisco SFP-10G-SR 0-2415-03 10 Gigabit Transceiver
$5.40
Intel X520-DA2 10Gb 10Gbe 10 Gigabit Network Adapter NIC Dual Port E10G42BTDA
$28.94
HP 560SFP+ 10GB 2-port PCIe NIC Ethernet ADAPTER 669279-001 w/ (2) 10GB SFP+
$16.99
Lot of 5 Cisco 10G SFP+ 850nm 300m Transceiver Module P/N: SFP-10G-SR-10-2415-03
$15.00
Dell 10 Gigabit SFP+ SR Transceiver 0XYD50 NEW SEALED
$24.99
Arista SFP-10G-SR 10GBASE-SR XVR-10001-20 850nm SFP+ Optical Transceiver
$30.00