PfSense/OPNsense 14x1Gb, 8-Core, 8GB RAM, 80GB SSD, AES-NI, QAT (Lanner FW-7573) For Sale

PfSense/OPNsense 14x1Gb, 8-Core, 8GB RAM, 80GB SSD, AES-NI, QAT (Lanner FW-7573)
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Buy Now

PfSense/OPNsense 14x1Gb, 8-Core, 8GB RAM, 80GB SSD, AES-NI, QAT (Lanner FW-7573):
$149.00

You are buying a used but in excellent working condition, Cloudgenix 3000 (rebranded Lanner FW-7573) network appliancethat has been reloaded with a fresh installation of the latest version of pfSense (if you prefer OPNsense*leave a message during checkout).
It is powered by an 8 core Atom C2758 CPUand it comes with 8GB of RAM and a 80GB SSD. It has 14x Gigabit Ethernet ports. I configured the 1st Internet port (white cable in pictures) as the WANand bridged the 8 port module interfaces as members of the same LAN (Switch configuration). The remaining ports I left for the buyer to configure as needed. They are detected as follows (from left to right):
- Controller ports: igb10, igb11- Internet ports: igb12, igb13, igb0, igb1- Module ports: igb2-igb5 bottom and igb6-igb9 top.
The pfSense configuration page can be accessed at 192.168.10.1, credentials are admin/Passw0rd (root/opnsense for OPNsense). In case you need console access baud rate is set at 115200.
The pictures are representative of the device you will receive. Comes with power cable.
Thanks
____* Though the BIOS is password protected, I was able modify it and enable UEFI boot in order to install OPNsense. Legacy boot (the default setting for this device) is incompatible with the OPNsense installer/OS. I also enabled hot plugging of SATA drives to make the installation of another OS easier.
Buy Now

Documentation