-
Junior Member
registered user
I have tried the above solution without success:
After booting from Knoppix 3.7 Live-CD I went mit cntrl-ALt-F1 to the console.
The command "knoppix tohd...." is not known to the bash shell (mybe it was only a path issue?)
I tried to issue "knoppix tohd=/dev/sda1" (I have an USB disk which was found and auto mounted by Knoppix) on the boot prompt.
This failed (probably because sda1 is not ready to be used at this early time in the boot process).
By the way, what is the difference to "knx-hdinstall" (does this prepare for a full boot from HD vs. a boot from CD taking most of the files from HD??)
Can I use this command as well to get all the system copied to HD and then have both options: boot from HD or from CD+HD?
[edit] I tested "knx-hdinstall" - command not found as well. I found "knx2hd" and "knoppix-installer" instead. I am a bit confused now! Any help to guide me out of this confusion?
Thx for clarification!
-
hey,
thank for all the replys,
and since I see that other people have the same problem I explane what I did.
to tschloss: try the next command for hd install: 'sudo knoppix-installer'
(I didn't try it, it's from earlier reply, and I think it's from a regular shell)
I personaly didn't try the 'tohd...' and 'fromhd...' and it looks like it going to make some problems with ntfs files.
I tried and used 'bootfrom...' and it works. BUT, it didn't work from the external hd because it wasn't mounted or someting like that at the time it was needed for booting (so I'm guessing it won't work with 'tohd...' and 'fromhd...' ).
and when I used the c: hd for 'knoppix.iso' (bootfrom=/dev/hda1) it works fine but it mounted ALL the hd as 'cdrom2.loop' and I couldnt get to this hd, not even for reading.
so, if you need access to the hd that you put the 'knoppix.iso' image on, you need other solution.
if someone knows someting else, please let as all know .
thanks, shimi
Similar Threads
-
By susanjohnson in forum Hdd Install / Debian / Apt
Replies: 4
Last Post: 04-21-2005, 11:36 AM
-
By nmz787 in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 11-21-2004, 09:17 AM
-
By Jez in forum General Support
Replies: 4
Last Post: 08-09-2004, 09:06 PM
-
By nishtya in forum Hdd Install / Debian / Apt
Replies: 5
Last Post: 04-18-2004, 10:08 PM
-
By Superstoned in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 08-27-2003, 03:04 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bare S100 CPU Replacement for ALTAIR 8800 IMSAI 8080 JAIR Single Board Computer
$42.00
MITS Altair 8800 Computer Bamboo Reproduction Arduino Tested Working Assembled
$649.99
MITS ALTAIR 8800 Original Vintage Microcomputer
$6000.00
S-100 backplane motherboard bare PCB 9 slot (for Altair/IMSAI)
$30.00
Altair MITS 8800 CPU Parts Kit not IMSAI 8080 S100 (board NOT included)
$64.95
MITS ALTAIR 8800 Original Vintage Microcomputer with 14 boards - Buy It Now
$9500.00
MITS ALTAIR 8800 Original Vintage Microcomputer S-100 Buy It Now $5999
$5999.00
Vintage SCCS Interface Microcomputer Magazine Pair 1976 IMSAI 8080 Altair 8800
$26.00
Vintage Altair 8088 CPU Wire Wrapped S100 Card w Mon EPROM circuit board #T71
$99.00
1974 Early Microcomputers by MITS Altair 8800's Ed Roberts HP-9810 Mark-8 Scelbi
$55.00