Have a look at "Check the ISO" and also try the cheatcode "knoppix testcd"
I have a Dell Latitude Laptop that I have been running Zorin (Ubuntu derivitive) on. I just installed Knoppix from Flash drive and it went well and I was able to boot yesterday. I now booted up today and I get to where it says INIT: Entering runlevel: 5 and freezes. I am sitting at the root@Microknoppix:/#_ the underscore blinks for a few mins then stops and now I'm frozen.
Any help would be greatly appreciated.
Thanks
Have a look at "Check the ISO" and also try the cheatcode "knoppix testcd"
It;s installed on the hard drive. booted it two or three times then the next morning it wouldn't boot.
Ok, but what is about "check the ISO" and "knoppix testcd" with the Knoppix DVD/CD you've downloaded and used for HD installation? And what type of installation have you done: "HD Install" or "Flash Install to HD"?
Last edited by Werner P. Schulz; 05-09-2013 at 05:48 PM.
Broadcom LSI 9400-16i Raid card SAS/SATA/NVME SFF-8643 SAS3416 PCIe 3.1 x8 HBA
$155.27
Broadcom LSI 9400-16i Raid card SAS/SATA/NVME SFF-8643 SAS3416 PCIe 3.1 x8 HBA
$155.12
Adaptec ASR-81605ZQ 12G SAS 16-Port 1GB Cache PCIe x8 RAID Controller
$131.99
LSI 9207-8i 8-Port SAS Non-RAID 6GBPS PCIe Host Bus Adapter
$34.95
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
2 Bay RAID Hard Drive Enclosure USB 3.0 Type-B for 2.5" SATA SSD/HDD Enclosure
$59.99