132-0008-001 INFINERA X-FANTRAY-X10 DTN-X XTC-10 50VDC 24.0A WOCUAX8NAA For Sale

132-0008-001 INFINERA X-FANTRAY-X10 DTN-X XTC-10 50VDC 24.0A WOCUAX8NAA
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Buy Now

132-0008-001 INFINERA X-FANTRAY-X10 DTN-X XTC-10 50VDC 24.0A WOCUAX8NAA:
$150.00

Infinera

DTN-X DWDM Switching Transport Chassis (XTC)
X-FANTRAY-X10 FanTray for XTC-10

Seller Refurbished!

Part Number:132-0008-001 (CLEI: WOCUAYANAA)

Description:


The Infinera XTC-10 supports four (4) removable fan trays (only one 1 each offered here) which are located at the top and bottom of the chassis. Each fan tray consists of four individual controlled, variable speed fans.

Fan speed is regulated by the active XCM (or by local sensors if external control is unavailable). On initial system startup, the fans are spun up to a predetermined percentage of maximum speed to cool the system to a normal operating temperature of 27º C; once normal operation is achieved, fan speed is decreased to reduce noise levels in compliance with OSHA, ETSI, and NEBS standards, and to increase fan MTBF. Fan speed will increase at any time during normal operation if the ambient temperature goes up.


The XTC-10 is split into two individual cooling zones, one for the upper half and one for the lower half of the chassis, each with independent thermal operating properties. The top two fan trays operate as a set and are referred to as Fan Tray 1 and 2, and the bottom set of fan trays are referred to as Fan Tray 3 and 4.


Each set of fan trays operate in series to achieve the best combination of working in a high back pressure setup while providing the most uniform airflow. The thermal system employs a pull-pull approach to move air through the system. The airflow enters the system from the center of the XTC-10 (through a central inlet air plenum, split in half) and is pulled up by the top set of fan trays and forced out through the top rear and side exhaust vents. The bottom set of fan trays pull air down from the center of the XTC-10 and force it out through the bottom rear and side exhaust vents.


Four fan trays are required for normal operation on the XTC-10 and are redundant. Individual fans within a fan tray are N+1 redundant with power hot-swap controllers. If an individual fan on a fan tray has failed, the XTC-10 system can operate indefinitely in an environment up to 50ºC. An alarm will be generated via the management interfaces that indicates one of the fans has failed. Although the system can run reliably with a single fan failure on a fan tray, the user should change the fan tray at the earliest convenience to ensure against a second fan failure.


The faulted fan tray should be kept installed inside the XTC-10 until a replacement fan tray is available. The fan trays should never be partially removed from the system unless performing air filter maintenance (when performing air filter maintenance, the fan trays should not be removed from the system for more than one minute).

Condition: Seller Refurbished - Excellent condition!Other:Includes our 60-day warranty!

Location:A1FCAB

Check out our store foradditional XFPs/SFPs and supported modules!

WE PROVIDE A DOAWARRANTY

See Shipping/Payment tab for further warranty details

Pictures are representative and may not be exact item sold, unless specified.



PAYMENT AND SHIPPING DETAILS


For any shipments requiringmotor freight,please contact us directly and provide us with:


  • The type of location - residential or commercial
  • The delivery zip or postal code
  • If there will be a fork lift or lift gate available
  • Are there any other special requirements?

(e.g. specific time or appointment required for delivery)

We generally ship UPS.If you prefer Fedex or other carriers, please provide us with your shipper number.

INTERNATIONAL CUSTOMERS:Delivery times expected to be around 14 business days, but may take as long as a month depending on your customs clearance.Customer may be subject to other duties at time of delivery imposed by importer/customs not by Seller.We ship primarily domestic.You will be required to provide necessary documents for import or accept a delay in processing and/or cancellation and refund of your order.We will not make or accept any “invoice” adjustments on amount to alter import fees.

FLORIDA RESIDENTS: does not have a per-county calculator. Florida tax is currently being collected at 7.5%. If this is higher than your county, you will be refunded the difference (or contact us prior to check-out EASIEST.) If your item is greater than $5000.00, orthis is a tax exempt purchase please contact us for invoice modification prior to check-out.


Florida shipments will not be processed until sales tax has been collected or a sales tax exemption certificate has been obtained.


Thank you for your business and please check out our other store items!


E&M COMMUNICATIONS

\"Specializing in new and used telecom networking equipment at the lowest prices\"


It is our goal to provide a consistent inventory of the most popular and hard to find equipment on the market at wholesale prices.


AND MUCH MORE


Buy Now

Documentation