-
OpenMosix and DHCP
This might be and probably is a n00b question.....but, how do I go about trying to get a network boot using terminal server if there is already a DHCP sever on the network. Whenever I boot a computer it loads PWE but when it is searching for the DHCP server it always returns the main Windowz server instead of my terminal server. Thus the boot fails. Some times I can get the network boot to load but it is far from a sure thing....
Another question I have is......when asked as to the IP range that the terminal server can delegate do i have to specify a range that is on the same sub domain as the terminal server itself? That is to say if the terminal servers IP is 192.168.20.111 can I specify a range that is 192.168.35.111 192.168.35.254? Also, is the range linked in any way to the IP that the client machine held previously?
Thank you for your time and replies
-
Senior Member
registered user
At home I have a linux router that is a dhcp server and I can PXE boot to a machine running knoppix terminal server or clusterKnoppix openMosix terminal server no problem.
However, at school (win2k) I cannot get the PXE boot disk to discover my terminal server. Go figure.
is the range linked in any way to the IP that the client machine held previously?
No, my machine that boots into linux with dhcp is 192.168.1.66, however when I gave terminal server the address range of 192.168.1.200 - 254 it came up as 192.168.1.200.
rock
-
This is my problem as well. When at home on a simple appliance based network it works. While on a server-delegated network, however, the connection fails. Any help?
-
Does nobody have an answer? I have fiddled with this for a week and gotten nowhere.
Anybody! please help me. I really like the idea of a Cluster but need to try it in a workable environment. Any help is greatly appreciated even if it is just speculation on what the problem may be. Once again thank you.
-
Senior Member
registered user
There is no simple way. If you have 2 dhcp servers on one network there isn't much you can do.
-
An answer I feared but suspected. At least I can put it to rest now. Thank you for your reply.
Similar Threads
-
By renaxgade in forum General Support
Replies: 8
Last Post: 12-23-2003, 02:35 AM
-
By cybervet in forum General Support
Replies: 1
Last Post: 10-27-2003, 11:44 PM
-
By ktheking in forum General Support
Replies: 1
Last Post: 08-06-2003, 03:53 AM
-
By tyiooo in forum Networking
Replies: 19
Last Post: 06-11-2003, 09:28 AM
-
Replies: 23
Last Post: 06-06-2003, 12:42 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

HP ProLiant MicroServer Gen8 G1610T @2.3 GHz, 16GB, 712317-001 NO HDD/OS
$199.00

Supermicro 1U Network Server Appliance 16GB RAM 800GB SSD 6 LAN Ports Powers On
$450.00

Supermicro CSE-937 3U Storage Chassis No CPU No HDD No Ram Tested & Reset
$129.99

Supermicro E300-12C Mini 1U Barebone X12SCV-LVDS LGA1200 SNK-P0073A4 w/ Adapter
$225.00

HP PROLIANT MICROSERVER GEN8 E3-1220LV2 @ 2.30GHz, 8GB RAM, NO HDD/OS
$164.97

Supermicro 2U X10DRU-i 2x E5-2680 v3 2.5ghz 32gb Ram 240gb SSD 2x GPU *READ*
$369.99

Supermicro E200-8D Mini Server Xeon D-1528 6-Core 64GB ECC 1TB SSD 2x10GbE IPMI
$525.00

New Barebones Supermicro 5019D Server, 4C/8T Xeon D-2123T, 1U Rackmountable, 10G
$449.99

Supermicro CSE-937 3U Storage Chassis No CPU No HDD No Ram Tested & Reset
$129.99

Supermicro 505-2 Server
$280.00