USB

[ILoveKagome]

When i plug in any USB flash drive. it will not be shown in KDE's Device Broser In Konquorer. How do i mount my USB Drive On my computer

Here are my computer specs

Everex StepNote NM3500W

Display: 15.4" WXGA Widescreen (1280 x 800)
Processor: 1.3GHz, Intel® Celeron® M Processor 350J
Memory: 256MB DDRII 533
Hard Disk Drive: 40GB PATA (4200rpm)
Optical Drive: DVD-ROM/CD-RW
Front-side Bus: 400MHz
Graphics: S3® Unichrome Pro (64MB shared memory)
Audio: AC '97 with Built-in Speaker
I/O Ports: (1) DB 15-Pin VGA Port, (3) USB, (1) Microphone Port, (1) Headphone Port
Modem: (1) 56K data/fax modem
LAN: (1) 10/100 Base-T Fast Ethernet
Wireless LAN: Built-in 802.11b/g
Pointing Device: 2 Button Glide Pad
Power Supply: 65 Watt AC-DC Adapter
Battery: 3-Cell, Rechargeable Lithium-Ion
Measurements: 14.1� x 10.7� x 0.9 - 1.5� (L x W x H)
Weight: 5.9lbs

please help

[Harry Kuhman]

I don't know your particular hardware, but try having the drive already plugged in when Knoppix boots and see if that helps. And we are talking about booting from an optical disc, are we not? (All bets are off if not.)

[marhleet]

I plugged in my notebook drive in the usb caddy

it auto finds it ok
but errors when trying to access it

need to be root user to do the mount
fat is invalid
ended up with

create a folder to mount it to
/home/dr/nb
then, root user
mount -t vfat /dev/sda1 /home/dr/nb

it's showing fine, now. g'luck

[ILoveKagome]

i tried both methods nether worked

the "mount -t vfat /dev/sda1 /mnt/usb1" command result in this

mount: /dev/sda1 is not a valid block device

so whats wrong do i need a driver or somthing

[marhleet]

hmm, my usb 1.1 camera isn't playing nice either

will have to do uhcdev thingy research

from a dos tty screen
and root access

cd /dev
ls

my notebook was autofound on the usb when i plugged it in
and it auto showed in the Info Center USB view
and /dev/sda and /dev/sda1 appeared

the camera showed an error

usb 1-1: device descriptor read/64

errors, 6 lines in all
does you dos screen show errors when you plug in ?

[ILoveKagome]

i see no devices in info view just USB UHCI Root Hub (1) and USB UHCI Root Hub (2) and both my mp3 and thumb drive are hooked up

maybe this will help

MP3 is a Sandisk Sansa m230
Flash Drive is a Sandisk Cruzer U3 Device

also video is weard its only 1024x768 and when i had windows it was 1280x800

is there a way to make it that big again

[ILoveKagome]

i see no devices in info view just USB UHCI Root Hub (1) and USB UHCI Root Hub (2) and both my mp3 and thumb drive are hooked up

maybe this will help

MP3 is a Sandisk Sansa m230
Flash Drive is a Sandisk Cruzer U3 Device

also video is weard its only 1024x768 and when i had windows it was 1280x800

is there a way to make it that big again

here is a snapshot of the Info View Screen

[ILoveKagome]

just wondering what version of knoppix are you using

[marhleet]

I am trying it with the all new 5.1.0
I don't think it's gonna play

though it appears there is supposed to be support straight out of the box, perhaps off the cd-boot
I can't be bothered plugging in the cd-rom again

[ILoveKagome]

I am trying it with the all new 5.1.0
I don't think it's gonna play

though it appears there is supposed to be support straight out of the box, perhaps off the cd-boot
I can't be bothered plugging in the cd-rom again

really theres a 5.1 i still have 4.3

maybe i will try that and if it works upgrade

i HD installed Knoppix on my laptop. i just dont like Windows

Just curious do you thank it could be because its a Sandisk that its not reconised on Knoppix