Page 4 of 29 FirstFirst ... 2345614 ... LastLast
Results 31 to 40 of 284

Thread: Knoppix 3.4 with 2.6 kernel available in two weeks?

  1. #31
    Senior Member registered user
    Join Date
    Feb 2003
    Location
    Nova Scotia, Canada
    Posts
    2,479
    Quote Originally Posted by strushb
    Hey guys, since nobody objected when some asked for the iso, i am going to seed it (bittorrent), please remove Post if it is not wanted here. I am using an open tracker I found today, so be patient

    Warning - I did not find any Statements that this Data should not be posted to Internet, but please check for yourself. I checked the files that i ripped off the CD with the md5sums on the disk, so it should work fine.

    Torrent
    You have no worries about re-distribution Knoppix is GPL software however I get a bad data from tracker error and the file size is 685.9 mb which seems a little low since Klaus usually takes it up to almost the limit on the disk.

  2. #32
    Junior Member
    Join Date
    Feb 2004
    Posts
    1

    Tracker not working

    Not working here either:

    ERROR:
    bad data from tracker -

    saving: Knoppix-3.4-2004-01-22-de-bySTrushB.iso (685.9 MB)
    percent done: 0
    time left: Download Failed!
    download to: /usr/iso/Knoppix-3.4-2004-01-22-de-bySTrushB.iso

  3. #33
    Junior Member
    Join Date
    Apr 2003
    Location
    Oregon, US
    Posts
    2
    I'm able to use it using Shad0w's bittorrent client, but not with the official client. (I don't understand how a torrent can be made that doesn't work with the official client, but there it is.) Unfortunately, there are very few participants in this torrent.

    Anyway, download Shad0w's bittorrent client and try again.

    K<bob>

  4. #34
    Junior Member
    Join Date
    Feb 2004
    Posts
    2
    Knoppix 3.4 seems to run great. I hevan't tested it so much yet I just tried to install it on HD but that doesn't seem to work for me. It doesn't work for some guys on heise.de/ct, too so I think that I will have to wait until the final 3.4 comes out.
    I'm not sure how to publish the knoppix cd bittorrent wouldnÄt work because of the NAT I think.
    If any body has an ftp available I would upload it. It seems to be available in edonkey/emule, too but only 2 people or so have it.

  5. #35
    Senior Member registered user
    Join Date
    Feb 2003
    Location
    Germany
    Posts
    1,159
    If anyone already has 3.4 running, I would be very interested whether it works with klik - let's say for the RealPlayer package.

  6. #36
    Junior Member
    Join Date
    Feb 2004
    Posts
    7

    another torrent

    If you want to try out knoppix 3.4 I would suggest to join #knoppix on irc.freenode.net there is a bittorrent (that works with the normal client) with 4 seeds and no downloaders.

  7. #37
    Junior Member
    Join Date
    Nov 2003
    Posts
    15
    Just burned the iso. uname -a returned
    Linux Knoppix 2.4.23-xfs #1 SMP Mi Dez 10 22:25:03 CET 2003 i686 GNU/Linux


    I thought it had 2.6? Is there an option that has to be passed on boot to use it instead of the 2.4 kernel?

  8. #38
    Senior Member registered user
    Join Date
    Feb 2003
    Location
    Nova Scotia, Canada
    Posts
    2,479
    Quote Originally Posted by Joe999
    Just burned the iso. uname -a returned
    Linux Knoppix 2.4.23-xfs #1 SMP Mi Dez 10 22:25:03 CET 2003 i686 GNU/Linux


    I thought it had 2.6? Is there an option that has to be passed on boot to use it instead of the 2.4 kernel?
    knoppix26 at the boot: prompt and if you need English then you may want to add lang=us you get the = by using SHIFT and 0 (zero) at the same time the keyboard layout is German as well and I needed to use the wheelmouse cheat code to get the scrollwheel working with the 2.6 kernel.

  9. #39
    Member registered user
    Join Date
    Sep 2003
    Posts
    80
    knoppix26 didn't boot on my system. Looks like a problem finding the CDROM off of the Adaptec SCSI card. Last error was saying that it was looking at /dev/hde for the CDROM when infact, /dev/hde is an IDE HD( have 2 IDE HD's with one being an HPT366 ).

    knoppix24( the 2.4.x kernel ) booted fine. As mentioned in the other thread, KDE seemed a bit more responsive but that's all I really noticed with very littel other testing.

  10. #40
    Junior Member
    Join Date
    Mar 2003
    Posts
    6
    torrent site has been takes down. Anyone have a link to download the torrent from?

Page 4 of 29 FirstFirst ... 2345614 ... LastLast

Similar Threads

  1. How do I install kernel source and config/compile kernel??
    By cfish in forum Hdd Install / Debian / Apt
    Replies: 0
    Last Post: 04-25-2005, 07:31 AM
  2. Errors and kernel panic during boot (2.6 Kernel)
    By gitarzysta in forum Hdd Install / Debian / Apt
    Replies: 1
    Last Post: 06-03-2004, 08:36 PM
  3. Kernel Source 2.4.23-xfs and Kernel install for wlan-ng
    By Nils_ in forum Hardware & Booting
    Replies: 0
    Last Post: 03-08-2004, 10:50 AM
  4. Kernel compile problem - first Knoppix kernel compile
    By Nigel_Tufnel in forum Hdd Install / Debian / Apt
    Replies: 2
    Last Post: 10-20-2003, 01:09 PM
  5. Modified kernel results in Kernel Panic - No init found.
    By tji in forum Customising & Remastering
    Replies: 4
    Last Post: 06-12-2003, 06:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


HP PROLIANT MICROSERVER GEN8 E3-1220LV2 @ 2.30GHz, 8GB RAM, NO HDD/OS picture

HP PROLIANT MICROSERVER GEN8 E3-1220LV2 @ 2.30GHz, 8GB RAM, NO HDD/OS

$164.97



HP ProLiant MicroServer Gen8 G1610T @2.3 GHz, 16GB, 712317-001 NO HDD/OS picture

HP ProLiant MicroServer Gen8 G1610T @2.3 GHz, 16GB, 712317-001 NO HDD/OS

$199.00



Supermicro 505-2   Server picture

Supermicro 505-2 Server

$280.00



Supermicro 1U Network Server Appliance 16GB RAM 800GB SSD 6 LAN Ports Powers On picture

Supermicro 1U Network Server Appliance 16GB RAM 800GB SSD 6 LAN Ports Powers On

$450.00



Supermicro E200-8D Mini Server Xeon D-1528 6-Core 64GB ECC 1TB SSD 2x10GbE IPMI picture

Supermicro E200-8D Mini Server Xeon D-1528 6-Core 64GB ECC 1TB SSD 2x10GbE IPMI

$525.00



New Barebones Supermicro 5019D Server, 4C/8T Xeon D-2123T, 1U Rackmountable, 10G picture

New Barebones Supermicro 5019D Server, 4C/8T Xeon D-2123T, 1U Rackmountable, 10G

$449.99



Supermicro 2U X10DRU-i 2x E5-2680 v3 2.5ghz 32gb Ram  240gb SSD 2x GPU *READ* picture

Supermicro 2U X10DRU-i 2x E5-2680 v3 2.5ghz 32gb Ram 240gb SSD 2x GPU *READ*

$369.99



Supermicro 5019D-4C-FN8TP Xeon D-2123IT (4C/8T) 64GB DDR4 10GbE 480GB 1U Server picture

Supermicro 5019D-4C-FN8TP Xeon D-2123IT (4C/8T) 64GB DDR4 10GbE 480GB 1U Server

$689.00



Supermicro CSE-937 3U Storage Chassis No CPU No HDD No Ram Tested & Reset picture

Supermicro CSE-937 3U Storage Chassis No CPU No HDD No Ram Tested & Reset

$129.99



Nasuni NF-50 Supermicro Server, Atom CPU C2558, @ 2.40GHz, 8GB RAM-No HDD/OS/AC picture

Nasuni NF-50 Supermicro Server, Atom CPU C2558, @ 2.40GHz, 8GB RAM-No HDD/OS/AC

$250.00