Knoppix 8.1 USB-stick installation

[Karibu]

More Help needed:

Time and Day Settings:

I live in Time zone America/Vancouver. After each reboot the Time zone is reset to local time which is my time +8 hours.

Where is the configuration file for Time and Day Settings to find?
I might be able to change "local" to "America/Vancover" ?

[Karibu]

I found this thread posted by philo on 08-09-2014:
Time zone change cannot be made permanent.

I can set the time zone and it shows correct in /etc/timezone "America/Vancouver".
After reboot /etc/timezone is overwritten and says "localtime"

[Karibu]

I entered UTC in /etc/adjtime and set the time zone again to America/Vancouver.
After reboot /etc/adjtime was still ok (UTC) but /etc/timezone was again "localtime".
What to do?

[philo]

BIOS time (hardware clock) --> UTC

/etc/adjtime --> UTC [instaead of LOCAL]

/etc/timezone ---> America/Vancouver

and maybe in :
/media/sd__/boot/syslinux/syslinux.cfg
LABEL knoppix LABEL knoppix64, add inside APPEND:

--> tz=America/Vancouver

[Karibu]

1) BIOS time (hardware clock) -->UTC

2) /etc/adjtime --> UTC [instaead of LOCAL]

3) /etc/timezone ---> America/Vancouver

4) and maybe in :
/media/sd__/boot/syslinux/syslinux.cfg
LABELknoppix LABEL knoppix64, add inside APPEND:

-->tz=America/Vancouver

To 1):
The BIOS is for MSI motherboard 785GM-E51.
I can not change the time - it shows +7 hours from my local time.

To 2):
Ihave changed this to UTC!

To 3):
Ihave changed this to America/Vancouver - but it is mysteriously overwritten to America/New-York

To 4):
root@Microknoppix:/# sudo nano /media/sdg/boot/syslinux/syslinux.cfg

/media/sdg/boot/syslinux/syslinux.cfgdoes not exist

root@Microknoppix:/# ls
config-4.12.7 grub ipxe.lkrn System.map-4.12.7-64 vmlinuz-4.12.7
config-4.12.7-64 ipxe.efi System.map-4.12.7 vmlinuz vmlinuz-4.12.7-64

[jfitie]

I just run this script automatically on boot (see https://wiki.lxde.org/en/Autostart). Good enough for me. Change the 2nd line as needed.

time=$(date +%Y%m%d\ %H:%M:%S)
echo Europe/Amsterdam | sudo tee /etc/timezone
sudo dpkg-reconfigure -f noninteractive tzdata
sudo date --set="$time"
sudo hwclock --systohc


You could even add something like:

(sleep 60 && sudo rdate -n pool.ntp.org && sudo hwclock --systohc) &

[philo]

Useful reads:

http://knoppix.net/wiki/Cheat_Codes

http://knoppix.net/forum/threads/31161-Time-problem

[philo]

I can not change the time - it shows +7 hours from my local time.

Then that's set at UTC already?

[Karibu]

I found syslinux.cfg in >Root >KNOPPIX >boot and added
inside APPEND: -->tz=America/Vancouver

Now, in window under ---> Preferences ---> Time and Date the line 'Time zone' is filled in correctly (America/Vancouver) and the line 'Configuration' is filled in correctly (Keep synchronized with Internet servers) as well.
I still don't get the PST (Pacific Standard Time) though. Only if I switch the configuration back and forth between 'Manual' and '...synchronized...' then, after a few minutes, the PST is shown....

What else is missing?

[philo]

What else is missing?

The ntp package?